Specifications
OWNER’S GUIDE CONDITIONERS, PAD | 14375
PAD-DO7 Isolated 7-channel Relay Output module
Module purpose: Driving dry contact relays
Isolation: 300 VDC
Signal connection: 25-pin D connector
Important note: This module is not supported by DEWESoft
data acquisition software
PAD-DO7 specications
Parameter PAD-DO7
Output channels: 7 relay output channels
Relay type: Form “A” relay SPST N.O. with dry contacts
Max load: 0.5 A (60 VAC) 1 A (24 VDC)
Gain linearity: 0.001%
Input isolation: 300 VRMS
Relay on-time: 5 mS typical
Common mode voltage: 130 VDC / 250 VAC @ 50 Hz
RS485 interface for module control/data: Ye s
Power supply voltage: +12 VDC (±10%)
Power consumption: 1.0 W typical