Specifications
OWNER’S GUIDE CONDITIONERS, PAD | 14371
PAD-V8-P Isolated 8-channel Voltage module
Module purpose: Voltage input module for DC/quasi-static signals
Input ranges: Selectable from ±100 mV to ±50V full-scale
Bandwidth: 6 Hz
Isolation: 350 VDC
Signal connection: 25-pin D connector
Interface boxes: PAD-CB8-BNC: 8 channel connector block, BNC
PAD-CB8-B: 8 channel connector block, banana jacks
PAD-V8-P specications
Parameter PAD-V8-P
Input channels: 8 differential input channels
Input ranges:
Voltage
Current
±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V, ±50 V, -0.15 to +1.5 V
With external shunt resistor
Resolution: 10 µV for all ranges
Sample rate: 12 Hz for all channels, maximum
Read-out speed: Typical 80 channels/s
1)
DC accuracy: ±0.02 % of reading ±900 μV
-3 dB Bandwidth: 6 Hz (±1.5 dB @ f0)
Input isolation: 350 VDC (channel to channel, and input to output)
Over-voltage protection 150 VDC
Common mode voltage: 350 VDC / 250 VAC @ 50 Hz
NMR: 120 dB @ 50/60 Hz
CMRR: 140 dB @ DC, 120 dB @ 50 Hz
RS485 interface for module control/data: Ye s
Power supply voltage: 9 VDC ±10 %
Power consumption: 0.6 W typical
1) Depending on system and number of channels
PAD-CB8-B and PAD-CB8-BNC break-out boxes
High quality break-out boxes are available for the PAD-V8-P module.
The PAD-CB8-B provides eight banana jacks, while the PAD-CB8-BNC
provides eight BNC onnectors. Each one features a 2 meter long cable
and connector that plugs into the face of the PAD-V8-P module. There
are no electronics inside these break-out boxes.
V