Specifications
14-364 | OWNER’S GUIDE
PAD Module Connectors
Front Panel Connector Accessible to the user. The connector type and pin assignment varies
from module to module. Detailed pin assignment of each module is shown
in the appropriate module description.
Rear Connector Not user accessible. 9-pin male SUB-D, interface to the Dewetron System.
HSI, DAQ, and PAD
module rear panel
RS-232/485 interface
PAD modules can be congured via RS-485 interface, and they require this interface for all data transfers.
The DEWE-3210 and DEWE-3211 include an internal RS-232/485 converter and interface. This converter
allows communication with all Dewetron signal conditioning modules.
To communicate with the modules, the RS-232 interface must be set to the following parameters:
baud rate: 9600
data bits: 8
parity: no parity
stop bits: 1
handshake: not required