Specifications

OWNER’S GUIDE  CONDITIONERS, DAQ | 13361
DAQN-V-OUT Isolated Voltage Output module
Module purpose: 1:1 (unity gain) isolation module, compatible
with AD series cards which have analog outputs
Input/Output range: ±10 V
Bandwidth: 400 Hz
Isolation: 1500 VRMS
Signal connection: -B: Banana plugs
-BNC: BNC connector
-D: 9-pin SUB-D connector
DAQN-V-OUT specications
Parameter DAQN-V-OUT
Input range: ±10 V
Input range maximum: ±36 V maximum (damage will occur above ±36 V)
Input resistance: 50 MΩ
Output voltage range: ±10 V
Over range capability: 5 % @ 10 V output
Output drive: 50 mA max.
Output resistance: 0.5 Ω
Output current during fault, maximum: 75 mA
Output protection, transient: ANSI/IEEE C37.90.1-1989
CMV, output to input, continuous:
Transient
CMRR (50 / 60 Hz)
1500 VRMS max.
ANSI/IEEE C37.90.1-1989
110 dB
Accuracy: ±0.05 % span (0 to 5 mA load)
NMR (-3 dB @ 400 Hz): 100 dB per decade above 400 Hz
Non-linearity: 0.02 % span
Stability:
Offset
Span
±25 ppm/°C
±20 ppm/°C
Noise:
Output ripple, 1 kHz bandwidth 2 mVpp
-3 dB Bandwidth: 400 Hz
Power supply voltage: 9 VDC ±5 %
Over voltage protection ±10 V
Power supply current: 350 mA full load, 135 mA no load
Power supply sensitivity: ±12.5 ppm/%
OUT