Specifications

13-348 | OWNER’S GUIDE
Sensor connection
Standard charge or IEPE accelerometer or microphone connector and cable. Use a standard BNC plug on
the Dewetron module side. The sensor side may be molded into the sensor, or a modular connector with
BNC, 10-32, etc.
BNC to Microdot adapter
This adapter is included for no additional cost with the DAQP-CHARGE-A module.
- Using an IEPE® sensor with charge input selected (or a Charge sensor with IEPE® input selected) will not destroy
the module or the sensor, but the measured values will be incorrect.
- When using the ne tuning option of the input range (3686 steps per decade), the module is no longer in a
calibrated state. In this case the input range LED’s are not active!