Specifications

OWNER’S GUIDE  CONDITIONERS, DAQ | 13305
MODULE INPUT TYPE RANGES TEDS
BANDWIDTH BW
FILTERS LP / HP
ISOLATION ISO
OVERVOLTAGE
PROTECTION OP
DAQP-STG
Strain gages, bridge
sensors, voltages
Bridge:
Voltage:
BW: 300 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 300 kHz
ISO: 350 VDC
OP: ±10 VDC
Pot/Ωic sensors Resistance/Ωs
Thermocouple via
MSR-BR-TH series
Full range of thermocouple
type
DAQP-BRIDGE-A
Strain gages, bridge
sensors
±1, ±2, ±5, ±10, ±20, ±50
mV/V
(@ 5 Vdc excitation)
N/A
BW: 20 kHz
LP: 10, 100 Hz
1, 5, 20 kHz
ISO: 350 VDC
OP: ±50 VDC
Pot/Ωic sensors 200 Ω to 10 kΩ
Thermocouple via
MSR-BR-TH series
Full range of thermocouple
type
DAQP-BRIDGE-B
Strain gages, bridge
sensors
±0.1, ±0.2, ±0.5, ±1, ±2, ±5,
±10, ±20, ±50, ±100 mV/V
(@ 5 Vdc excitation)
Yes
BW: 200 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 200 kHz
ISO: N/A
OP: ±10 VDCPot/Ωic sensors 200 Ω to 10 kΩ
Thermocouple via
MSR-BR-TH series
Full range of thermocouple
type
DAQP-CFB
AC bridge, strain
gage, carrier
sensors
Bridge: 0.1 to 1000 mV/V
Inductive: 5 to 1000 mV/V
N/A
BW: dc to 2.3 kHz
LP: 10, 30, 100, 300 Hz
1 kHz
ISO: N/A
OP: ±10 VDC
Inductive/ LVDT
sensors
Voltage: 0.2 to 1000 mV/vrms
Charge / IEPE Measurement
DAQP-ACC-A
IEPE sensors
±50, ±166, ±500 mV; ±1.66,
±5 V (Gain: 1, 3, 10, 30, 100)
Yes
BW: 0.5 Hz to 300 kHz
LP: 1, 10, 100, 300 kHz
HP: 0.5 Hz, 5 Hz
N/A
DAQP-CHARGE-A
IEPE and charge
sensors
Note: selectable
integration and
double integration
Charge: 5, 50, 500, 5000,
50000 pC
IEPE: ±5, ±50, ±500 mV,
±5 V
(0, 20, 40, 60 dB)
N/A
BW: 0.1 Hz to 50 kHz
LP: 100 Hz; 1, 3, 10, 50
kHz
HP: 0.1 Hz, 1 Hz, 10 Hz
N/A
DAQP-CHARGE-B
Charge sensors
Note: selectable
time constant
for static charge
sensors
±100, ±500, ±2 000, ±10 000,
±40 000, ±200 000, ±1 000
000 pC
N/A
BW: 0.5 Hz to 100 kHz
LP: 10, 30, 100, 300 Hz;
1, 3, 10, 30, 100 kHz
HP: DC, 0.0001 Hz to
0.5 Hz
ISO: 350 VDC
Temperature and Universal Measurement