Specifications

13-304 | OWNER’S GUIDE
MODULE INPUT TYPE RANGES TEDS
BANDWIDTH BW
FILTERS LP / HP
ISOLATION ISO
OVERVOLTAGE
PROTECTION OP
High Voltage Measurement
DAQP-HV
V
High voltage
±20, ±50, ±100, ±200, ±400,
±800, ±1400 V
N/A
BW: 300 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 300 kHz
ISO: 1.8 kVrms
(line-to-line)
DAQP-HV-S3
V
High voltage
±20, ±50, ±100, ±200, ±400,
±800, ±1400 V
N/A BW: 700 kHz
ISO: 1.8 kVrms
(line-to-line)
DAQP-DMM
V
High voltage
±10, ±40, ±100, ±200, ±400,
±1000 V
N/A
BW: 20/30 kHz
LP: 10, 100, Hz
1, 2, 20/30 kHz
ISO: 1.5 kVrms
Low/Medium Voltage & Current Measurement
DAQP-LV
V
Voltage, current
with external shunt
or current sensor
±10, ±20, ±50, ±100, ±200,
±500 mV
±1, ±2.5, ±5, ±10, ±25, ±50 V
N/A
BW: 300 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 300 kHz
ISO: up to 1 kVrms
(with banana jacks)
OP: 350 VDC
IEPE via MSI-
V-ACC
±10, ±20, ±50, ±100, ±200,
±500 mV
±1, ±2.5, ±5, ±10 V
PT100, Pt200,
Pt500, Pt1000,
Pt2000 and
resistance via MSI-
V-RTD
-200 to 1000 C and 0 to
6.5 kΩ
DAQP-V
V
Voltage, current
with external shunt
or current sensor
±10, ±100 mV
±1, ±5, ±10, ±50 V
N/A
BW: 50 kHz
LP: 10, 100 Hz
1, 10, 50 kHz
ISO: up to 1 kVrms
OP: ±500 VDC or
350 Vrms
DAQP-LA-SC
Current
Note: 5Arms
continuous
±0.1, ±0.3, ±1, ±3 A
±10 A peak, ±30 A peak
max 5Arms continuous current
N/A
BW: 300 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 300 kHz
ISO: 1.4 kVrms
DAQP-LA-B
Current
Note: intended
for 4-20 mA
applications
±2, ±6, ±20 mA
±60 mA, ±200 mA, ±0.6A
max 0.6 A
N/A
BW: 300 kHz
LP: 10, 30, 100, 300 Hz
1, 3, 10, 30, 100, 300 kHz
ISO: 1.4 kVrms
Bridge / Strain Gage Measurement