Specifications

OWNER’S GUIDE  CONDITIONERS, HSI | 283

There are several series of Dewetron signal conditioners that may be installed in your system in many pos-

sible combinations. This section covers the HSI series plugin modules. These are user-exchangeable mod-

ules, all of which have the highest bandwidth that we offer in a plug-in module, and robust signal isolation,

protecting you and your measurements against ground loops and other typical measurement problems.

HSI modules have the advantage of being “hot swappable,” meaning that they can be exchanged by the

user any time, even with the system is powered on.

This modularily also means that the DEWETRON system can be converted very quickly to handle different

measuring requirements and applications - simply plug in the modules that you need, make sure their ad-

dresses are correct, and then you’re up and running in a matter of moments.

DEWETRON HSI modules are small, multi-range ISOLATED signal conditioners, and hundreds of thou-

sands of them are in use all around the world right now.

HSI Series Modules

HSI Module Connectors

Front Panel Connector Accessible to the user. The connector type and pin assignment varies

from module to module. Detailed pin assignment of each module is shown

in the appropriate module description.

Rear Connector Not user accessible. 9-pin male SUB-D, interface to the Dewetron System.

HSI, DAQ, and PAD

module rear panel

HSI Series Signal Conditioners