Specifications
OWNER’S GUIDE D310 | 327
Conguration guide, D310 model
The D310 has a xed conguration: there is a RACK-8 built into the side panel, so all you need to do is
choose any any of our DAQ, PAD, or HSI series plug-in modules to ll the slots.
Connecting EPAD2 modules to your D310 (DAQ or MDAQ version)
Both D310 versions accept optional EPAD2 series external PAD modules for adding many channels of
slower temperature signals, voltage, current, and RTD inputs. Simply connect the rst EPAD2 module to
the standard EPAD connector. Further EPAD2 modules can be daisy-chained from one to the next. The last
EPAD2 module must have the terminator installed in the open connector (even if there is only one EPAD2
module the terminator must be installed). Up to 16 EPADs in any combination can be connected.
EPAD2 cable
xPAD-CBL-LL-??
(where ?? is the length in meters)
EPAD-TERM-L
terminator at the last
module in the chain