Specifications
10-258 | OWNER’S GUIDE
Neutrino-4
The Neutrino-4 is an optional external battery charger and additional DC power supply unit. It can recharge
four Dewetron standard batteries (model BATT-95WH) simultaneously when powered from 120/240 VAC.
The Neutrino-4 has a built-in LCD display exactly like the one which is on the DEWE-321x mainframe, so it
will show you the number of batteries inside and their aggregate charge status.
Using a special power cable, the Neutrino-4 can also be unplugged from AC and plugged into the DC
input of many DEWETRON systems to provide an additional power source. With a full loaded and charged
Neutrino-4 plus the batteries already within models like the D310 (with 310-UPS option), DEWE-3050, and
DEWE-3210, you then have the power of six Dewetron BATT-95WH batteries. Since a rule of thumb is that
you typically get one hour of data acquisition time per battery, this means your system can run practically an
entire work day without being connected to external power.
Above left: with the door open and batteries partially or completely removed
Above right: with the door closed
The Neutrino also supports hot-swapping of its batteries, so you can feed in fresh batteries at regular inter-
vals, to keep it supplying DC power indenitely.
What’s included with the Neutrino-4:
The Neutrino-4 mainframe
AC mains input power cord
One (1) BATT-95WH smart battery (please order additional batteries separately if you require them)
Note - the Neutrino-4 is not compatible with the SideHAND2 series batteries used within the D310 with the
310-UPS option, or the DEWE-3050. We offer a desktop charger called the BAT-CHARGER-1, which sup-
ports both the original BAT-95W and newer SideHAND2 series batteries