Specifications

OWNER’S GUIDE  IMPORTANT ACCESSORIES | 10257
DPS-2410 Call-outs
Rubberized shock
absorbing corners
AC Mains input
receptacle
Power on/off
Chassis ground point
LED power on
indicator
24 VDC power
output
20A fuse
Important safety notices:
⇒ Never block the vetilation holes on any side of the DSP-2410
⇒ Always locate the DPS-2410 in an open, well ventilated area
⇒ Never apply power to the DPS-2410 when it is enclosed within the carry bag, shipping case, or any other loca-
tion where air ow is restricted.
⇒ Always replace the external fuse with the same value and type. Never substitute a larger A value.
⇒ Use the chassis ground point if needed to reference the voltage to the UUT or test stand
⇒ Do not open the DPS-2410. Service must be performed by qualied DEWETRON service personnel.
⇒ If the chassis appears damaged, or any connector is loose or damaged in any way, do not apply power to the
DPS-2410.
⇒ Never use the DPS-2410 for any purpose other than for which it was supplied by DEWETRON.
⇒ Failure to observe these safety protocols, as well as other best practices related to electronic equipment and
power conversion equipment, can lead to equipment damage, or bodily harm or even death to you and others.