Specifications

OWNER’S GUIDE  SOFTWARE | 9243
Dening the Filter Chain
We need to dene this lter chain. Let’s start by clicking the SETUP button on it the right side of it. When you
click this SETUP button it will open up the Filter Settings dialog box:
The Filter Settings dialog box
The Filter chain is used to lter out ethernet frames by MAC address, IP address, packet type, etc. This is
a very exible setup, because you have the ability to include or exclude specic elds. You can also write
multiple strings in each eld.
- Note - if you write multiple strings in each eld, they must be separated by a space character
Here is an example:
IP Address: 192.168.10.1 192.168.10.2
This will include both addresses. This also works with all other elds.
If you click in the elds, e.g. “Destination IP”, the according part in the protocol will be highlighted. Here
for instance we search for all messages going to 192.168.1.255; switch the view to “DEC” to see the plain
numbers: