Specifications

9-242 | OWNER’S GUIDE
Regardless of whether you have selected ETHERNET or UDP as your data source, as soon as you can set
one up, this will appear on the large open area of the software:
Ethernet Stream ready to be further defined
So far this section has column headings, but is emtpy. Therefore now we must add a lter chain, and then
some CHANNELS to be displayed and recorded.
Dening the Filter Chain
Since each stream can have one or more lter chains, we need to dene the one(s) that we need.
Click the [ + ] button under the capture “Filter chains.”
When you do, a single lter will be created for this stream, and it will appear like this:
Ethernet filter within the first stream