Specifications

3-24 | OWNER’S GUIDE
Installing the 310-UPS option
The standard D310 chassis has three tapped holes on the side opposite the display (the side with the large
DEWETRON logo on it). These holes are used to mount the 310-UPS option.
Tapped mounting holes for
the 310-UPS option
STEP 1
Line up the 310-UPS stanchions with the three tapped holes.
STEP 2
Insert a standard blade screw driver into each of the round holes in the back of the 310-UPS and tighten the
screw clockwise until it seats rmly. Repeat until all three screws are secure. Do not overtighten.