Specifications

9-224 | OWNER’S GUIDE
With this eld selected, click the icon and it will go away. There is no UNDO, so be careful.
If your form is ready, there is still one very important step left: you must tell DEWESoft WHEN to show this
form to the operator! There are checkboxes near the bottom, where you can tell DEWESoft to pop up this
form at the start of acquisition, or at the end, or both.
It is critical to check at least ONE of these boxes, otherwise the form will never appear! Remember that this
data header exists at the PROJECT LEVEL. Therefore, it does not matter which setup you use when storing
data: when this project is active, the data header and internal variable settings that you establish here will be
applied during recording.
Let’s see how this works.