Specifications

9-218 | OWNER’S GUIDE
Above you can see that in the formula math setup, there is a tab called Variables, which will appear as soon
as there is at least one variable created for the current Project! So you can use these values within your
MATH formulas, as shown above… we are dividing the real analog signal called ‘Oil’ by the variable called
‘Oil_Temp.”
This formula creates a new virtual channel called ‘Oil_calc’ with the units ‘C’ (notice how we entered those
parameters near the top-left corner of the screen above).
So now this new math channel is available to be placed on the screen. Let’s take a look at that by clicking
the Measure button near the top of the DEWESoft window:
Click Measure from the ribbon...
After clicking Measure you will see the rst display screen, called Overview. If this is the rst time you have
visited the Overview screen with this setup, DEWESoft will automatically put your USED channels onto the
screen in the form of digital meters, like this: