Specifications
OWNER’S GUIDE SOFTWARE | 9201
It is important to know how to zoom in and out on various parts of your data, to look closer and make mea-
surements. Notice that when you are in the Analysis mode, there are two grey cursors and one yellow cursor
on the screen. The yellow cursor is also shown in the reference strip at the top.
But let’s use the gray cursors to zoom. Simply drag them into position around the area that you want to
zoom. Or, you can simply click and drag to the right, then release, to set the cursors.
Now move the pointer between them, and you will notice that it changes to a pointer with a small PLUS
symbol below it:
To zoom this area, simply CLICK with your mouse (or touch with your nger, if you have a touchscreen)
between these cursors!
Notice what the screen looks like now: