Specifications
OWNER’S GUIDE SOFTWARE | 9199
Marking your recordings with EVENTS
During recording, you can mark your data in three ways:
Notice event - just hit the spacebar on the keyboard, and a gray line will be time-stamped and added to
the recorder graph. This is like the simple event marker of an old fashioned chart recorder.
Text event - press the N key on the keyboard. Click on the log area if necessary to open the log for typ-
ing. Just type in whatever you like. The text event will be time-stamped according to when you pressed
N, not when you nish typing, so there is no rush!
Voice event - (requires that sound events be activated in the project conguration, and that your Dewe-
tron system has a usable sound card installed) press and hold V on the keyboard, and talk into your PC
mic (not included by Dewetron). A short voice message will be added to the data le.
You will see all of these events later when you reload this captured data to the screen. More about that later.
Each event type is indicated on the screen with a vertical line of a different color. You can also activate them
using the little icons near the log area instead of the keyboard shortcuts, as shown here.
Stop storing...
Press the STOP button and the recording will be closed. The screen will freeze.
Reloading your Data Files
This is as simple as pressing the ANALYSIS button near the top-left of the screen! If you have not gone to
any other screen since stopping the recording, DEWESoft will automatically load the last data le that you
recorded. Here it is!