Specifications

9-192 | OWNER’S GUIDE
Notice also that you could elect to start numbering the les at something higher than 0000. Simply select or
enter a starting le number.
Of course, you can change the base part of the lename to anything supported by the Windows OS. In the
example below we entered Gear_check as the base part of our lename.
You may also turn on the DATE to be added to the lename. You could also turn on the TIME, which will dis-
able the number at the end (you cannot have both).
In the gray example area, you will see a preview of how your les will be named (as shown above).
Automatic le SWITCHING function
When multile is not checked, the box below it is called Stop storing after, and as we saw, it allows you to
set DEWESoft to stop storing according to how big the le is, or when a certain amount of time has elapsed.
But when multile is checked, the Stop storing after function changes slightly to be called Make new le
after. In this case, DEWESoft will not stop recording per se, but it will close the current data le and immedi-
ately open a new one, which will be named according to the active multile settings. In other words, instead
of STOPPING storage outright, DEWESoft will switch to the next le in the series automatically.
Check the box and you will get similar conguration controls as before:
As before, DEWESoft can switch les automatically based on time (absolute or relative), le size, or trigger
count. If you want one triggered event per data le, this is the way to do it, for example. Set it to triggers and
set the quantity to 1.