Specifications

9-178 | OWNER’S GUIDE
Activate the Channels
All channels that are set to USED will be stored when you press STORE. It does not matter whether the
channel is shown on the display screen or not! If it is activated here as USED, it will be stored. It is possible
to activate a channel but not store it - this is an advanced feature not covered here.
To turn on more channels, simply press their [Unused] buttons, and they will change to [Used].
- HINT: to turn on (or o ) all channels at once, click the top of the column and select from the menu that will ap-
pear:
“Select all” will turn ON all channels, while “Deselect all” will turn them all OFF.
Set Up Your Channels
The easiest and most direct way to congure a channel is to click the “Set ch. #” button all the way to the
right:
To congure channel 0, for example, click the [Set ch. 0] button.
The channel setup dialog will appear. This is a critical screen to learn about, so let’s take a close look at
what it does and how to use it.