Specifications

OWNER’S GUIDE  SOFTWARE | 9173
DEWESoft software specifications
Function blocks (continued)
Exact frequency calculation
CA noise (included with DEWESoft-OPT-CA combustion analyzer)
Angle sensor (user definable angle-based sensor toolkit)
FFT, SFFT, CPB
Scope trigger math function
Strain gage rosette calculator
Math channel operation modes
Math channels can be created before or after recording
Math channels created before recording may be set to not process until after
recording, or may be set to process during recording
Math functions created after recording can be processed on a subset of the data, or all
of the data
New channels resulting from math channels are saved to the data file, both before and
after recording
On-screen analysis capabilities
Cursor measurements
Recorder graphs have selectable cursors which can be used to take precise
measurements anywhere within the data, or any channels
Delta ampltidue and delta time are calculated, displayed, and printable
Cursors can be locked individually
Graph may still be zoomed/unzoomed when cursors are locked
Cursors and their readings appear on the paper when screen is printed
Data zoom in/out
Any recorder graph can be used to zoom the data in or out, as many times as
necessary
Data replay Data can be replayed to make it look like it did when recording
Replay speed and direction
Replay can be increased or decreased in speed up to 8000x
Replay can be forward or reverse
Data export capabilities
Export file formats available
Matlab®, Flexpro, Excel®, delimited ASCII text
Diadem®, Universal 58, FAMOS®, nsoft time series, Sony log, RPC III, Comtrade®,
ATI®, Technical Data Management TDM, Impression Diadem®, Standard Data File,
WFT, Replay RPL, Wave (audio wav), Google Earth® KML
Export selection
The area zoomed using the cursors will be exported.
If no zooming has been done, the entire data file will be exported
Export channel selection Any combination of channels may be exported, from 1 to all
Export mode
Data may be exported at the full acquisition rate, or at the reduced storage rate.
When reduced is chosen, user may select to export up to four columns per channel:
min, max, ave, rms
Export timebase User selectable absolute time, relative time, or trigger (zero) time
Software licensing and distribution
Acquisition mode A valid DEWESoft license is required to RECORD (acquire) data
Analysis mode
No license is required to use DEWESoft to analyze data
DEWESoft may be given to third parties for installation and use to analyze data files
Off line math, zooming, printing, and data export are all supported