Specifications

OWNER’S GUIDE  SIGNAL CONNECTIONS | 8157
Two Pulse Edge Separation Measurement
The two pulse edge separation measurement is similar to the pulse width measurement, except that there
are two input signals: Counter Start and Counter Stop. After a rising edge has occurred on Counter Start the
counter counts rising edges of the internal time base. Additional edges on signal start are ignored. After a
rising edge has occurred on Counter Stop the counter stops counting and the value is stored in a register.
At the next rising edge on Counter Start the counter starts counting from zero again. At every Sample Clock
((1), (2), ... (6)) the register value is read out.
Two Pulse Edge Separation Measurement gure:
Software setup:
- If the input signals are inverted, the falling edges will be used for counting.