Specifications

| 7143
Signal Input Connectors
Analog input connectors (up to 128)
Connector: Varies according to the signal conditioning module(s) installed.
See the signal conditioning tables for further details about the module(s) installed within your system.
Function: to input analog signals to the dynamic measuring inputs of the DEWE-3050.
Counter/encoder connectors (2)
Connector: LEMO EGG.1B.307CLAD52
Mating connector: LEMO FGG.1B.307CLAD52
Mating cable available: CTR-CABLE-05 (includes connector)
Function: used to input tachometer, TTL level pulse train, or encoder outputs for measuring and conversion.
- Note: see the COUNTER conguration section later in this guide.
CAN BUS interface connector (UP-ORION-CAN2 option)
Connectors: DSUB-9 standard CAN wiring
Mating connector: DSUB-9 male mate
PIN Function Comment
1 CAN0 Lo First CAN port
2 CAN0 Hi First CAN port
3 D GND
4 CAN1 Lo Second CAN port
5 CAN1 Hi Second CAN port
6 GND
Function: used to connect to vehicle CAN BUS interfaces. Also can be used to read data from sensors which
have a CAN BUS output, such as Dewetron’s own CPAD2 series signal conditioning modules.