Specifications

2.5U
1.5U
2.0U
2.5U
1.5U
2.0U
OWNER’S GUIDE  DEWE3040RM | 7133
DEWE-3040-RM Rear Panel Congurations
With DAQ / PAD / HSI modules only
The rear panel can be configured with one 16 slot
racks for DAQ / PAD / HSI modules
2.5U-PANEL-DAQ-16 - compatible with all DAQ and
PAD modules, and HSI modules (up to 300 kHz
bandwidth)
2.5U-PANEL-DAQ-16-HSI - compatible with all HSI
modules up to 2 MHz bandwidth, all PAD modules,
and most DAQ modules
When a 16-slot rack is installed, two 2U and two
1.5U panel spaces remain available for additional
panel options to be added.
With DAQ / PAD / HSI and MDAQ
conditioners
The rear panel can be configured with one 16 slot
racks for DAQ / PAD / HSI modules - and still leave
room for MDAQ conditioners!
2.5U-PANEL-DAQ-16 - compatible with all DAQ and
PAD modules, and HSI modules (up to 300 kHz
bandwidth) - or -
2.5U-PANEL-DAQ-16-HSI - compatible with all HSI
modules up to 2 MHz bandwidth, all PAD modules,
and most DAQ modules
Thus, you could still add 32 more channels of
MDAQ signal conditioning, and a 1.5U panel for 32
channels of thermocouples, as one example.
Or you could add three blocks of 16 channels of
MDAQ signal conditioning, as long as one of them
was using the 1.5U high BNC panel type. This
means 48 MDAQ channels PLUS 16 isolated DAQ /
PAD / HSI conditioner channels.