Specifications

1-12 | OWNER’S GUIDE
Calibration
Every measuring instrument should be calibrated at
regular intervals. The norm across nearly every in-
dustry is annual calibration, although this can vary
according to the industry, environment, govern-
ment regulations, and other regulations.
Before your Dewetron data acquisition system is
delivered, it is calibrated at our factory in the USA.
Dewetron utilizes a NIST traceable metrology sys-
tem based on the Fluke 5500 series calibrator and
other industry leading instruments. We have created
numerous Met/CAL® procedures and specialized
calibration hardware and software to allow the
automation of calibration check and adjustment of
nearly every signal conditioner and A/D card that we
manufacture. These procedures are proprietary to
Dewetron, although they are available for purchase.
Customers who have the same Fluke hardware can
use them to similarly automate their calibration of
Dewetron instruments.
Calibration services are available directly from
Dewetron, on whatever frequency you require. We
do not subcontract calibration services, and perform
it ourselves in house.
Contact Dewetron for further information about
calibration services and calibration equipment that is
available for purchase.
Certicate included
Each system is delivered with a certicate of compli-
ance with our published specications.
However, if you require a traceable calibration
certication with data, calibration reports are avail-
able for purchase with each order. We retain them
for at least one year, so calibration reports can be
purchased after your system was delivered.
Models Covered
This owner’s guide covers the following model(s):
 D3PC
 D310
 DEWE-3210
 DEWE-3040-RM
 DEWE-3050
What’s in this Guide
This guide is intended to serve as the top level
reference document for the models listed above. As
such, it contains the following key information:
 Support and calibration contact info
 Safety precautions
 System overview and block diagram
 Overview of all models
 Detailed specs for each model
 Quick start guide operation
And what is not in this guide:
As a top-level reference, This manual is not meant
to replace the comprehence reference manuals re-
lated to Dewetron sensors, signal conditioners, A/D
cards, interfaces, and software.
Please see those manuals for complete details.