Specifications

OWNER’S GUIDE  DEWE3050 | 6117
DVI Video Output
Connector: Standard DVI connector
Mating connector: Standard DVI-to-DVI or DVI-to-VGA cable
Function: For connecting the standard display.
- Note: the CRT output cannot be used in a “multiple monitors” setup under Windows. To support multiple moni-
tors with dierent images on them requires that a separate video card be added to the system.
- Note: DEWE-321x’s with 15” displays (made in 2010) have a max resolution of 1024x768; DEWE-321x (made in
2011 or later) with 17” displays have a max resolution of 1280x1024 . The CRT output is set to the same resolu-
tion as the built-in atpanel display.
USB 2.0 interfaces (6)
Connector: USB2.0 Standard-A receptacle
Mating connector: USB2.0 Standard-A plug
Function: For the connection of peripheral devices which utilize the USB 2.0 or USB 1.1 interface.
Description: The DEWE-3050 mainboard contains an Enhanced Host Controller Interface (EHCI) host
controller that supports USB 2.0 allowing data transfers up to 480Mb/s. There are typically six user-acces-
sible Universal Host Controller Interface (UHCI Revision 1.1) controllers that support USB full-speed and
low-speed signaling. All ports are high-speed, full-speed, and low-speed capable and USB Legacy mode is
supported.
Over-current detection on all USB ports is supported.
Note: It is recommended to use only High-/Full-Speed USB cable, specied in USB2.0 standard: