Specifications
OWNER’S GUIDE DEWE3050 | 6109
With DAQ / PAD / HSI and MDAQ
conditioners
The rear panel can be configured with one 16 slot
racks for DAQ / PAD / HSI modules
2.5U-PANEL-DAQ-16 - compatible with all DAQ and
PAD modules, and HSI modules (up to 300 kHz
bandwidth) - or -
2.5U-PANEL-DAQ-16-HSI - compatible with all HSI
modules up to 2 MHz bandwidth, all PAD modules,
and most DAQ modules
When one 16-slot rack is installed, two 2.5U and two
2.0U panel spaces remain available for additional
panel options to be added. For example: 32 channels
of MDAQ conditioners with DSUB connectors could
be added, plus 32 channels of MDAQ with BNC
connectors. Or 64 channels of MDAQ with BNC
connectors.
There are many possibilities.
With MDAQ conditioners only
The rear panel can be configured with up to:
SIX 2.0U MDAQ conditioner panels with DSUB
connectors could be added (96 channels) - or -
EIGHT 1.5U MDAQ conditioner panels with BNC
connectors would be added (128 channels) - or -
Many other comibinations of MDAQ panels and other
function panels
(ALL MODELS)
EPAD2 signal conditioners
for adding slow thermocouple
inputs, RTDs, voltages, and
currents (daisy-chain)
DEWE-3050 Rear Panel Congurations