User guide

be provided or which should be processed.
► Message contents
This displays the actual contents of the exchanged message.
☞ Function setting button
This buttons enables to perform the environment setting, monitoring
start/stop, message deletion, etc.
☞ Status indicating window
The connected server of the monitoring program, the connected status,
and whether to set the message monitoring deletion/save function are
displayed.
If there is not any error in the overall setting, select the monitoring start button
【
】, and then it is connected to the Link program and the message monitoring is
started. The following figure is the monitoring program that displays the SMDR/UCD
message contents that are currently being monitored.
<Figure 6–8. SMDR/UCD Message Monitor Basic Window>
If the monitoring stop button【
】 is selected, the monitoring immediately stops.
If the message deletion button 【 , 】 is selected, the contents that are
displayed currently are deleted from the message contents window. It does not influence
the file saving function.
In the function of saving the monitoring contents as files, if the file name is not
changed, the name is continuously saved and attached at the bottom of the