User guide

If the file save function is set, the monitoring file is created in the log folder of

the OfficeServ Link V3 program.

Each log file is created as “SMDR0X.TXT”/”UCD0X.TXT” in this folder. Basically,

total 10 log files are automatically created successively and managed. (The

number is given one after the other from 00 to 09.) If the size of one log file

exceeds 10 MB, the monitoring program creates a new log file (Within the

range of 00 ~ 09) and saves the monitored contents.

At the time of executing the monitoring program, the start number of the log file is

started from 0.

Select the [OK] button after the environment configuration is completed, and then the

basic window of the SMDR/UCD Message Monitor (SUMonitor.exe) appears as follows:

The window configuration is as follows:

☞ SMDR Message contents/UCD Message contents

This window displays the UCD message contents that are currently being

monitored.

The information displayed in the message display window is as follows:

► Received time

This part is for recording the message direction and the received time

of the message. Å ICON means the message provided from the switch.

► Switch number

This indicates the number of the switch to which the message should