User guide

► Message contents
This displays the actual contents of the exchanged message.
☞ Function setting button
This buttons enables to perform the environment setting for the
monitoring program, monitoring start/stop, message deletion, etc.
☞ Status indicating window
The connected server of the monitoring program, the connected status,
and whether to set the message monitoring deletion/save function are
displayed.
If there is not any error in the overall setting, select the monitoring start button
【
】, and then it is connected to the Link program and the message monitoring is
started. The following figure is the monitoring program that displays the message contents
that are currently being monitored.
<Figure 6–4. Monitor Program That Is Monitoring the Basic switch Message>
Select the monitoring stop button 【
】, and then monitoring immediately stops.
If the message deletion button 【
】 is selected, the contents that are displayed
currently are deleted from the message contents window. It does not influence the file
saving function.
In the function of saving the monitoring contents as files, if the file name is not
changed, the name is continuously saved and attached at the bottom of the
designated file.