User guide

Chapter 5. View of the OfficeServ Link V3 Operation Status
When the Link program is normally operated after the communication environment for the
OfficeServ Link V3 program is normally set and the switch is normally connected, each
user can access to the Link program if necessary and perform the call processing and
other relevant functions using SEC’s key phone switch.
This chapter describes the operation status according to the modes of the OfficeServ Link
V3.
5.1 Viewing the status of the OfficeServ Link V3 program operation
<Figure 5–1. When OfficeServ Link V3 is connected to a Switch Normally>
The user connection status window shows the information as follows:
► IP Address
Indicates the IP address of the current user’s PC.
► Port No.
Indicates the port number of the user’s PC that is participating in the
TCP/IP communication with the Link program. The port number of the
OfficeServ Link V3 program is the port number (6000 in default) specified
in the communication environment.
► User Type
Indicates the program of each user who accesses OfficeServ Link V3.
► Connect State