User guide

<Figure 3–15. Add User>
☞ Usage Object Switch Information
In selecting the information on the switch by the user, after selecting the
switch number from the list, use the usage button. (It is the same effect as
double clicking the mouse after selection.
☞ Basic switch Selection
After entering the user information and selecting the information on the
switch to use, among the selected switches, you should select the basic
switch information.
If setting a switch that is not selected to use to a basic switch, an error
message is displayed as follows:
<Figure 3–16. Basic switch Selection Error>
The switch number that is selected to use may be saved as a basic switch according
to the users. If possible, the switch number selected to use is recommended as a
basic switch.
☞ Use Filtering Mode for OfficeServ Call
To reduce the amount of the message traffic between OfficeServ Link V3 and
several OfficeServ Call Connections, you can use this option. Without this option,
Each OfficeServ Call will receive all switch messages from OfficeServ Link V3.
When there are many connected OfficeServ Calls at the moment and OfficeServ
Link V3 are connected to several switch systems. This situation can create huge