User guide

registered by each IP.
► User Name – Enter for the user information classification.
► User Information – Enter for the user information classification.
► Status – Display User connection status.
► Filtering – Display Filtering Option.
► Basic switch by the User – You can set the basic switch by the user.
► Switch set by the User – For the application program using the multi-switch,
this can be provided by selecting the information on the provided switch.
The basic switch information designated in the communication environment setting
and the basic switch information designated in the user information management
are the settings for the selected switch if not selecting the switch information to
provide to the application program. At first, check OfficeServ Link V3 if all the
accessible application programs can use the information on a single switch or
multi-switches. If the connected application program is the application program to
enable to use only a single switch, and if the corresponding connection IP for the
user is registered and the basically switch setting by the user is already
designated, this basic switch information is provided. If the user registration is not
done, by using the basic switch information set in the communication
environment, the information for this switch is provided. Information on each basic
switch should be set to the mode of possible use in the user information.
If the connected application program uses the multi-switch information, and if the
corresponding connection IP for the user is not registered, the registered switch
information is provided. If there is no information on a separately designated
switch, the basic switch information by the user is provided. If not setting the
basic switch information by the user, the basic switch information on the
communication environment is provided. In this case, a basic switch should be set
also to the mode of possible use in the user information.
3.4.2 User Information Addition
The [Add] button allows adding a user.