User guide

If output option of a status message is set, you can see the currently displaying

status message in real-time through DBGView.exe.

3.3.6 OfficeServ Link V3 Display Language Option

OfficeServ Link V3 program supports five versions of languages, Korean, English, German,

Italian and Russian. It operates in a language selected from the installation process.

However, if necessary, by using this option, the operation language can be modified. If

changing a language setting, for the application into the changed language, you should

restart the OfficeServ Link V3 program after stopping it. In changing the language setting,

these details are displayed as alarm message as follows:

If completing the setting for each option item above, select the [OK] button and save the

modified item. If selecting the [Cancel] button, all the changed items are canceled and

then return to the previous setting status.

3.3.7 Auto recovery Trial Count Option

If detecting an error in connection between OfficeServ Link V3 and the switch, OfficeServ

Link V3 executes the procedures to recover the connection by repeating as many counts

as designated in this option. If the auto recovery is not completed within the designated

counts (auto recovery execution), OfficeServ Link V3 completes the recovery process,

displays the recovery fault message, and stops in the stoppage status.

3.3.8 Auto recovery Cycle Option

This is an option to designate the execution cycle of the auto recovery mode by

OfficeServ Link V3. (By the minute)

This value executes the recovery mode again after waiting for the designated time in

activation from the time when OfficeServ Link V3 senses an error in connection with the

switch.