User guide

function to show it to the user and save it in the system disk.
General message monitoring program, 【Switch Message Monitor】is installed
with OfficeServ Link V3 program in installing a link program.
<Figure 3–10. General Message Monitoring Program>
To connect a general message-monitoring program, 6001 is entered in a
basic value. In setting a monitoring program, by using an IP address of a
computer where OfficeServ Link V3 program operates and the port number
designated in this option item, a user can access the OfficeServ Link V3
program.
☞ SMDR / UCD Message Monitoring Option Setting
According to the CTI option-setting item of the switch, Samsung key phone
switch can send out the SMDR message or the UCD message to the
OfficeServ Link V3 program. This SMDR / UCD message has a function to
provide the call charging information or UCD group detail information.
OfficeServ Link V3 program can monitor such SMDR / UCD messages in the
identically same form provided by a switch. To monitor this message,
OfficeServ Link V3 provides【SMDR-UCD Message Monitor】, SMDR/UCD
message monitoring program. The basic port value for monitoring the SMDR /
UCD message is set as 6002.
<Figure 3–11. SMDR / UCD Message Monitoring Program>
Message monitoring setting status information is expressed on the window of the
OfficeServ Link V3 program as follows:
<Figure 3–12. Display Window for Message Monitoring Setting Status>