User guide

<Figure 3–8. Port Status>
Communication environment can be set only when the connection between the
link and the switch is not established. This button is not activated (disabled) when
the connection to the switch is established.
☞ User Connection Waiting Port and Automatic Connection Allowance Waiting
Port
There are two types of ports waiting for the user connection of OfficeServ Link
V3 program. In the above environment setting, the designated basic port
number, 6000 is the port number accessed by the program that is license-
registered by OfficeServ Link V3. In such program types, there are OfficeServ
Call, Operator, DataView, EasySet, and News. Differently from this, although
using the switch message that OfficeServ Link V3 provides, the connection port
number of the programs that are not applied to the license confirmation
function of OfficeServ Link V3 is separately managed (Bypass Connection Port).
There are OfficeServ ACD, a messenger, a call simulator and programs for
other servers in the types of programs accessed through this port number.
The bypass connection port is not separately configured. If the user connection
waiting port is set, it is automatically set to the number where 500 is added to the
corresponding number. Therefore, if the number 6000 is currently designated as
the user connection waiting port, 6500 operates after being set in the bypass port
number.
3.3 Setting Option
The OfficeServ Link V3 program can set various operation features through the option
setting function. Select Option to display the following window: