User guide

<Figure 3–4 Switch Information Addition Result>
OfficeServ Link V3 tries to connect only for the switch that the Use Switch
Information item is selected.
The number of switches displayed in the status line of the main OfficeServ Link V3
window indicates the total number of switches that the Use Switch Information
item is marked.
For the CTI access stability, the following item settings should be modified for
the switch connected to OfficeServ Link V3. (Compulsory)
MMC 830 – CTI Server Addr: Enter the IP address of the computer where
OfficeServ Link V3 will be installed.
The switch entered as above rejects external CTI ports accesses other than the IP
addresses of the setting computers. Thus, abnormal CTI link access error can be
prevented.
☞ Modifying a switch
When the switch information saved is required to be modified, this function is used.
Select the target switch from the list and click the (
) button to display the
modification window.