User guide

number to be allocated to each switch to be connected, the IP information of the switch,
the port information and type, the switch name, and the password to request system
information and save the information on the switch. In addition, the information saved can
change, or the information on the switch not used can be deleted.
☞ Adding a switch
Select the (
) button to display the window that enables adding a switch.
<Figure 3–3 Switch Information Addition>
The following items should be entered to add the information on the switch.
► Switch No.: 1 ~ 8. Dual input is unavailable.
► Switch IP Address: OfficeServ MCP IP address
► Switch Port No.: Default switch CTI port is 5002.
► Switch Name: Switch name entered by the user
► Switch Type: OfficeServ / General
► EasySet Password: Password information required when OfficeServ
EasySet operates. (MMC 841)
► Use Switch Information: This item should be marked when the
connection to OfficeServ Link V3 is required after adding switch
information. This item should not be marked when it is required that the
switch information is added and when the use is on hold.
After entering the switch information, click the Add button. Then, the input
information is displayed.