Quick Guide

English - 6
2. Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV connects to
your home network, implements Smart Hub agreements, links to the source of your live TV signal, and sets up control of your
cable or satellite box.
Information You Need
Have the following information on hand before you turn on
your TV for the first time:
•
Your wireless network’s password. (Make sure your
network is on.)
•
Your Postal or Zip code.
•
The name and location of your cable or satellite
provider (if you use one).
Internet Access
The TV must be connected to the Internet to use the Smart
Features. If you have a wireless network, confirm that your
network router is working before you start the initial setup.
If you have a wired network, connect the TV’s LAN port to
the network with an Ethernet cable before you begin (CAT 7
cable preferred).
Running Initial Setup
1. Point the remote control at the TV.
2. Press the
button on the remote control to turn on the TV, and then follow the
directions on the screen.
For more information about using the remote control, see "The Remote Control" on page 7.
To learn more about operating your TV and its Smart Features, launch the TV’s built in
e-Manual after you have completed the Initial Setup. For information about the e-Manual,
see "The e-Manual" on page 8.
Using the TV Controller
The TV's Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
/ : Changes channels.
/ : Adjusts the volume.
: Displays and selects the available video sources.
Control Menu
Remote control sensor/TV Controller
N The product color and shape may vary depending on the model.
N You cannot input the numbers by pressing the TV's controller.
N If you press it first, the control menu appears. You can select the function by pressing and holding the TV's controller.
N With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Using the SOURCE button to switch between video sources
Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to a game
console connected to the second HDMI connector, press the
SOURCE button. The Source list appears across the top of the
screen. From the
Source list, select HDMI2 .
N The connector names may differ with the product chosen.
[J5200-ZC]BN68-07181J-01L02.indb 6 2015-05-18 오전 11:14:18