Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country EIRE U.K Customer Care Centre 0818 717100 0330 SAMSUNG (7267864) Web Site www.samsung.com www.samsung.com LED TV user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________ Serial No. _____________ © 2013 Samsung Electronics Co., Ltd.
Important Safety Instructions Warning! Important Safety Instructions (Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.) CAUTION This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Contents Basic Features 4 Features for your new TV Troubleshooting and Other Information 5 Accessories 18 What is Remote Support? 6 Using the Remote Control 19 Troubleshooting 7 19 Mounting the TV on the Wall Using Installing batteries (Battery size: AAA) 7 Turning on the TV 8 SETUP 21 Storage and Maintenance 9 Switching Between Video Sources 21 Providing Proper Ventilation for Your TV 10 Universal Remote Control Setup 22 Eco Sensor and Screen Brightness 23 Tip Prevention – Sec
Basic Features Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice. CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region. Features for your new TV •• 3D: This new feature enables you to view 3D content.
Accessories ✎✎ Please make sure the following items are included with your TV. If any items are missing, contact your dealer. ✎✎ The items’ colours and shapes may vary depending on the models. ✎✎ Cables not included in the package contents can be purchased separately. ✎✎ Check that there is no accessory hidden behind packing materials when you open the box.
Using the Remote Control Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE, Y, < P >, MENU, TOOLS, E, INFO, CH LIST, RETURN, GUIDE and EXIT. ✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Turns the TV on and off. Turn on and off the satellite or cable set-top box connected to the TV. Displays and selects the available video sources. Gives direct access to channels.
Installing batteries (Battery size: AAA) Match the polarity of the batteries to the symbols in the battery compartment. ✎✎ NOTE −− Use the remote control within 23 feet of the TV. −− Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs. −− The colour and shape may vary depending on the model. Turning on the TV Turn on the TV using the P button on the remote control or TV panel.
SETUP The initial setup dialog appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup process, including menu language choice, channel scan, network connection, and more. At each step, either make a choice or skip the step. Users can manually perform this process at a later time under the Screen Menu > System > Setup menu. ✎✎ If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Settop box automatically.
Switching Between Video Sources Press SOURCE button to switch between devices connected to the TV. For example, to switch to a game console connected to the second HDMI connector, press SOURCE button. From the Source list, select HDMI2. The connector names may vary depending on the product. Select Tools button at the upper-right corner of the screen to access the following functions.
Universal Remote Control Setup This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and other third-party external devices connected to the TV using the TV's remote control. ✎✎ Some or new models of the external device connected to the TV, may not be supported the Universal remote setup. Keep a distance of 5 cm at least between the IR Extender and the external device, as the illustration shows.
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ✎✎ Turn the TV off to connect or disconnect a CI card or CI card adapter. Attaching the CI Card Adapter Attach the adapter as shown side. ✎✎ To install the CI CARD Adapter, please remove the sticker attached to the TV. To connect the CI CARD Adapter, follow these steps. TV Rear ✎✎ We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”. 1.
Viewing the e-Manual The embedded e-Manual contains information about your TV's key features. This TV has a built-in user guide. To read it, use one of the following methods: •• Open the Support menu and choose e-Manual (Troubleshooting). •• Press the E-MANUAL button on the standard remote control. ✎✎ Words in blue refer to screen menu options and words in light blue refer to remote control buttons. ✎✎ A printable version of this guide is also available at www.samsung.com/support.
Network Configuration Updating the e-Manual Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in the same way with an application update. On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.
Network Security Protocols The TV only supports the following wireless network security protocols and is unable to connect to noncertified wireless routers: •• Authentication Modes: WEP, WPAPSK, WPA2PSK •• Encryption Types: WEP, TKIP, AES If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new WiFi certification specifications.
3D Basics 3D Active Glasses Features Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band. ✎✎ The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were released in 2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.
•• Turning the glasses on Press the power button briefly. The green LED is turned on for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.) •• Turning the glasses off Press the power button briefly. The red LED is turned on for 3 seconds. •• Performing the pairing process Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the red LEDs blink alternately for 2 seconds.
Watching 3D Video Some 3D modes may not be available depending on the format of the image source. To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button. 1. Go to the 3D screen. (Picture > 3D) 2. Select the 3D Mode. The 3D Mode screen appears. 3. Set the 3D Mode of the image you want to view. Troubleshooting If you encounter... Try this... Replace the battery. The 3D glasses should be close to the TV. Make sure that the distance My 3D glasses do not work.
Troubleshooting and Other Information What is Remote Support? Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely. •• Diagnose your TV •• Adjust the TV settings for you •• Perform a factory reset your TV •• Install recommended firmware updates How Does it Work? Having a Samsung Tech remotely service your TV is really pretty simple 1. Call Samsung Contact Centre and ask for remote support. 2. Open the menu on your TV and go to the Support section. 3.
Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working.
Preparing before installing Wall-Mount Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount 1 1 8.6 mm To install a wall-mount, use the Holder-Ring 1. Wall Mount Kit Specifications (VESA) ✎✎ The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer.
Storage and Maintenance ✎✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV. ✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches. Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Assembling the Cable manager Eco Sensor and Screen Brightness Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to Screen Menu > System > Eco Solution > Eco Sensor Do not block the sensor with any material. It can decrease picture brightness. 1.
Tip Prevention – Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below. To Avoid the TV from Falling 1.
Specifications Specifications - TV Display Resolution 1920 x 1080 Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing Stand Swivel (Left / Right) -20˚ ~ 20˚ Sound (Output) 10 W X 2 Model Name Screen Size (Diagonal) Dimensions (W x H x D) Body With stand Weight Without Stand With Stand UE40F6320 UE46F6320 40 inches 46 inches 934.
Guides Licences Recommendation - EU Only •• Hereby, Samsung Electronics, declares that this LED TV is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. •• The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. •• This equipment may only be used indoors. •• This equipment may be operated in all EU countries.
Warranty Card United Kingdom Republic of Ireland (EIRE) This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
