Specifications

▶
◀ ▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
4. Press the

button on your remote to go to the
IP Address.
5. Enter the IP Address, Subnet Mask, Gateway,
and DNS Server values. Use the number
buttons on your remote to enter numbers and
the arrow buttons to move from one entry field to
another.
6. When done, select the OK.
7. The network test screen appears, and network setting is done.
IP Settings
IP Mode Manual
DNS Mode Manual
DNS Server 0 . 0 . 0 . 0
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
● The displayed image may differ depending on
the model.