Owner's Instructions
l Warninq Safety ! Important Instructions CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. dangerous to make any kind of contact with any inside part of This symbol indicates high voltage is present inside, It is this product.
Thank Thank you technolo[L_z You for choosing for Samsung! We designed it with Your new it one of the best products will convenient, dependable Important Samsung Samsung TV represents easy to use on screen menus ties, making provide Choosing in its class. service We are proud and eiljoyment Safety the latest in television and closed captioning capabili to offer you a product that for years to come. Information Always be careful when using your TV receiver.
• Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused fur long periods of thne. This will pre vent damage to the unit due to lightning and power line surges.
1) Read these hlstructions. [_ OUBLE INSULATED When servidng Keep these instructions. use only identical replacement parts. Heed all warnings. 4) Follow aI[ hlstruetions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation instructions. openings, Install hi accordance Do not insta[] near any heat sources such as radiators, (including amplifiers) that produce heat.
CONTENTS Chapter ] 1: Your New TV ............... List of Featuzes ......................................... Familiarizing Yuurself with The TV .......................... Front Panel Buttons .............................. Front Pand lacks ................................ Rear Panel Jacks ................................. Remote Control ................................. Chapter 2: Installation ................ 1.1 1.l 1.2 1.2 1.3 1.4 1.5 2.1 Connecting VHF and UHF Antennas ......................
CONTENTS Chapter 4: Special Features ............ Customizing Yc_urRemote Control .......................... Setting Up Your Remote Control to Operate Your VCR (or DVD) Setting Up YourRemote Control to Operate YourCable Box .... Fine llming Channels .................................... LNA (Low Noise Amplifier) ............................... Tilt .................................................. 41 41 43 44 45 46 Digital Noise Reduction .................................. Changing the Screen Size ..
Your List NEw TV of Features _uz TV was designed with the latest technology.
I Your NEw TV Familiarizing Front The Panel buttons menu. Yourself with The TV TV_ basic fbatures, hlcludhlg Buttons on the front To use the more pane[ advanced control your f_atures, you must use the remote the on screen control. TXM2797HF TXM3297HF TXM3097WHF TXM2796HF TXM3296HF TXM3096WHF • TXM2798HF • TXM3298HF • TXM3098WHF -0 -0 -0 -0 O O "-.°..°.=°" O TV/VIDEO (TXM3298HF/TXM3098WHF/ TXM2798HF) Pressto changebetweenviewingTVproprams andsignalsfromothercomponents.
I Your NEw TV Front Panel You can use the front siona[l_ such see pages 2.1 I Jacks pane[jacks as a camcorder to connect or video game. an A/V component (For information O 1.3 (;]]API}I D : Yot}¢ Nt_ AUDIO is used on[y occa equipment, 2.8.) • TXM2798HF • TXM3298HF • TXM3098WHF TXM2797HF TXM3297HF TXM3097WHF TXM2796HF TXM3296HF TXM3096WHF O that on connecting INPUT jacks O SUPER VIDEO INPUT jack Used to connect the audio signals from a cam corder or video game.
I Your Rear NEw TV Panel Jacks Use the zeaz panel jacks to connect an AA/component that will be connected continuousl_ such as a VCR or a DVD playez. Because theze are two sets of inputjacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.
Your NEw TV Remote ] Control You can use the remote control up to about always point it dh-ectly at the T# You can also use your remote control for details. 23 feet from the T_/[ When using the remote, to operate your VCR and cable box. See page 4.1 O POWER O [urns the TV on and off, O Selects a target device to be con trolled by the Samsung remote control (i.e., TV,VCR,Cable box, or DVD), Number buttons Press to select channels directly on the TV. O +100 Press to select channels over 100.
J Your NEw TV Remote VCR Control _) Controls PIP Controls (TXM3297HF/TXM3097WHF) Press to rewind a tape in your VCR, PIP Press this button to control the PIP window, STOP Press this button to stop a tape during play, record, rewind or fast forward, If the button is SOURCE Press to select one of the available pressed during Full Automatic play, the function will be can celled, signal sources for the PIP window (i,e,, AV1, AV2, AV3).
Your NEw TV Remote ] Control @ O Power Turns the TV on and off, O Number Selects a target device to be con trolled by the Samsung remote control (i.e., TV,VCR,Cable box, or DVD), buttons Press to select channels directly on the TV. +100 Press to select channels over 100. For example, to select channel 121,press" +1007 then press" 2" and" 1: OH& and @ Pre-CH runesto tile previouschannel. @ TV/Video Press to display all of the available video sources (i.e., AV1, AV2, AV3, S VIDEO).
I Your NEw TV Remote _) Control Set Reset If your remote control is not func tioning properly, take out the bat teries and press the reset button for about 2-3 seconds, Re-insert Use this button when you are setting up your remote control to operate your VCR,Cable box, or DVD), the batteries and try using the remote control again. _) R.
INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 3OO ohm Fiat 7%vin Leads," below. If your antenna has one lead that looks like this, see "Antennas with 75 ohm Round Leads," oil page 2.2. If you have two antennas, VHF and UHF Antennas," Antennas with see "Separate oil page 2.2. 300-ohm Flat Twin Leads If"you are using an off air antenna (such as a roof antenna 300 ohm twin fiat leads, follow the directions below.
INSTALLATION Antennas ] with 75-ohm Round Leads Plug the antenna lead into the VHF/UHE terminal on the bottom of the back panel Separate VHF If you have combine This and two separate the two antenna procedure requires UHF Antennas antennas for your signals before TV (one connecting an optional combiner-adaptor Cable TV VH1_ and one the antennas (available UHF), you T_ must to the at most electronics shops). Connect both antenna leads to the combiner.
INSTALLATION Connecting ] to a Cable Box that Descrambles All Channels _,9 This terminal might be labeled "ANT OUT," "VHF OUT," or simply, "OUT." Find the cable that is corn nected to the ANTENNA QUTterminal on your cable box. Connect the other end of this cable antenna terminal on the back of the TV, Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some charmels (such as premium channels), follow the instructions below.
] INSTALLATION Connect a coaxial cable between the ANTENNA OUT terminal on the cabIe bQxand the B_IN terminal on the MB switch. In_om/n g Cable Splitter _ _ O_o BOX RF(A/B) SwiSh 5 Connect another cable _ between the other OU] terminai on the splitter and the A* IN terminal on the RF (A/B) switch. InComing CabkD Splitter RF(,_/B) 8witch CableBox Connect the last coaxiat cable between the OUT terminat on the RF(A/B) switch and the VHFiUHF terminaJ on the rear of the [V, Ir.
INSTALLATION ] Connecting a VCR These instzuctions assume that you have already connected your TV to an antenna or a cable TV system (accozding to the instructions oil pages 2.1 2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.
INSTALLATION Connecting ] an S-VHS VCR Your TV can be connected to an S Video signal from an S VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR,) VORl_mr PHI To begin, follow steps _, _'_ '_ l_ 3 in the previous section to connect the antenna or cable to your L_ cb_ ® VCRand your TV, WRwP_ c_ _.
INSTALLATION Connecting ] a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded To do this, connect your second VCR as follows: VC_ Input p_e_] by a second VCR. TV Rear P_I Connect a set o[aadJo cables between the AUDIO OUTjacks on the TV and LheAUDIO IN Audio_lo jacks 0n the VCR: (The VCR input jacks might be either on the front or on back of the VCR.
INSTALLATION Connecting (480p/1080i) ] a Digital TV Set-Top Box Connect the Y, P,, and P_ video outputs of the set top box to their corresponding inputs on the TVI Next, connect the Left and Right audio from the set top box to the corre sponding L and R terminals on the TV[ (The connections for a typical set top box are shown below'.) _ Top EI_XRear I_nel _ TV Re_ P_I between the ANTENNA OUTterminal on the Set lop Box and the antenna terminaI on the TV.
INSTALLATION ] Connecting a Camcorder The side pane[ jacks on your TV make it easy to connect a camcorder to your TVI They allow you to vie_ Vthe cameorder tapes without using a VCR. (Also see "Viewhlg an External Signal Source" on page 3,17) Locate the A/V output jacks on the camcorder.
INSTALLATION Installing ] Batteries in the Remote Control Make sure to match the "+" and "-" ends of the batteries with the diagram inside the compartment. _,9 them Remove the batteries in a cool, dry place be using the remote and store if you wonk control fbr a long time. The remote control can be used up to about 23 ff,et fl'om the Tg[ (Assuming typical TV usage, the batteries last for about one year.
OPERATION Turning the TV On and Off Press the POWERbutton on the remote control. You can also use the POWER Plug & Play button on the front panel. Feature When the TV is initially powered On, five basic customer settings proceed automatically and subset uently: Setting tile language, Video signal source, Ant. input check, Auto pro gram, and Coek.
OPERATION ] 4 Make sure that the an[enna IS connec[eQ re the TV.And then press me VOL+or VOL- button to acuva[e Auto Program or press the MENU button to skiD,(refer to "Auto program on page 3,6.) Em_zit 5 Press the VOL+or VOLbutton to move to [he hour or m_nute. Set the hour or ' )_ C.1A_k Tim .-s.-Im --_--m off mmnu[eBy pressing the CHA or CtlV button, *efer to ° Sett 3g me CLOCKOnpage 3.10 _ 6 When/ou lave finished, press the MENU button. The message" Enjoy your watcn_ng., s omsplayeo.
] OPERATION Viewing Viewing the the Menus and On-Screen Displays Menus The on-screen menus disappear fl'om the screen afier thirty seconds. With the power on, press the MENU button, The main menu appears on the screen. Its left si has five icons: Picture, SQund,Channel, Function and PIR 2 Use the CHA and CHV buttons to highlight one of the 5 icons. Then press the VOL÷button to access the icon's sub-menu.
OPERATION Selecting ] a Menu Language 1 Press the MENU button to display th e menu Press the OH• button to select" Function", then press the VOL+ button i77 !__ 2 Press the VOL + button to select the appropriate laBguage: Engtish Esoanot or Fran_a_s.
] OPERATION Memorizing the Channels Your TV can memorize and store all of the available channels for both "off air" (antenna) and cable channets. After the available channels are memorized, use the CH • and CN • buttons to scan through the channels. This eliminates the need to change chan nets by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and delet ing channels (manual).
OPERATION Storing ] Channels in Memory (Automatic Method) First, select the correct signal source (1 HRC, IRC).See steps ! _4 Onprevious page. Press the MENU button to disPlaYth e menu, Press the CH V button to select" Channel!, then presMhe VOLt button. 2 ¸ [ Press the CH V button to select" Auto 3 _ The all TV ofautomatically through the available cycles channels and stores them in memory.
] OPERATION Adding and Erasing Channels (Manual 1 Press the MENU button to display the menu. Press the CH • button to select t Channet" i then Press the VOL+ button. Press the CH • button or CH • to select Add/Erase", then press the VOL+ button, Press the VOL+ button. n Press the CH •/• button or the number buttons to select the channel you want to add or erase Press the MENU button. Pressthe CH A or CH • button to select ° Setect_.
OPERATION ] Changing Using the Channels Channel Buttons Press the CH • or CH _ button to change channels, When you press CH • or CH V, the TV changes channels in sequence. channels that the TV has memorized. (The TV must have memorized You will not see channels that were either erased or not memorized. Directly Accessing Use the number buttons You will see all the at least three channels.) Channels to quickly tune to any channel.
] OPERATION Labeling the Channels Use this feature to assign an easy to remember label to any channel (i.e., "CBS", "ESPN", "PUS2", CNN l", etc.) A label consists of'four fields, where each field is a letter, a num ber, "_", ora blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. 1 Press the CH • or CH • button m 11 to tune [o [he channe[ tNat Wll be Iabelec -<1 Note: You cannot select "Labe]ing" in the A/V mode. 2 Press LheMENU button to dis.
OPERATION Setting ] the Clock Setting the clock is necessary in order to use the various timer features of' the TM Also, you can check the time while watching the TV (Just press the DISPLAY button). Option 1: Setting the Clock Manually 1¸ Press the MENU button to disptay the menu.
[ OPERATJ_ON Option 2: Using TV Clock the Local PBS Channel 1 Press the MENU button to dispJay the menu. Press the CH _ button to select "Funetioo", then press the VOL+ button, Press the CH Y button to select _Auto clock set" menu then press the VOI.
OPERATION ] 5 Press the CH V button to select" Time zone" While "Time zone" is SeleCiec [net press IRe VOL+or VOL-to change the Time zone Seouence: ATL. EAST CEN. MTN. PAC.,ALAS. HAW.. _,_,_ ±hz_ m]l_t.t 6 Press the CH V button to select" DST"(Daylight saving time). While _DSF is seIected, press the VOL+or VOL- button to lee indicate ?Yes" or" NO" The clock is set, Press the MENU button to exit. (;HA_' H r._H: IV Ol'l}/'_ /_ 3.
] OPERATION Customizing the Picture You can use the on screen menus to change the Contzast, Tint and according to pezsonal preference. (Alternatively, "automatic" settings. See next page.) Brightness, Shazpness, Color, you can use one of' the 1 Press the MENU button to display ment 2 Press the VOL- or VOL+ outran repeatedly, until the word °Custom" is selected _WhenCustomis higel_getec the words"Adjust" will aooear on the screen,i 3 Press the CU • button to select "Aejus[.
OPERATION Using ] Automatic Picture Settings Yuur TV has three automatic picture settings ("Dynamic", "Standard" and "Movie" ) that are preset at the factor_ You can activate either Standard, Mild or Dynamic by pressing the RMODE button (oi by making a selection from the menu). Or, you can select "Custom" which automatically recalls your personalized picture settings.
] OPERATION Customizing the Sound The sound settings can be adjusted to suit your personal perfbrences. (Alternatively, you can use one of the "automatic" settings. See next page.) -_1 Press the MENU button to display the menu. Press the CH • button to select the "Sound", then press the VU[ + button. Press the VOL- or VOL button repeatedly, until the word _Custom" is selected (When Custom is selected, the words Equalizer! will appear on the screen).
OPERATION Using ] Automatic Sound Settings Yuur TV has four automatic sound settings ("Standard," "Music," "Movie," and "Speech") that are preset at the factory. Yuu can activate either Standard, Music, Movie or Speech by pressing the &MODE button (or by making a selection from the menu). Or, you can select "Custom," which automatically recalls your personalized sound settings. Press the MENU button to dispIay the menu, Press the CHV button to select the _Sound", then press the VO[ + butten.
] OPERATION Viewing You must an select the appropriate 1 Press the MENU button to o_splayme menu, Press the CH _ button to select "Channel , then aress the VOL+button. 2 Press [he CHVbuttonto setect _TV _V" 3 Press the VOL+button, Youwilt switch between viewing me stgnats coming from equipmen( con* nected to the IV's A/V jacks, and the TV signal 3.1 7 c.
SPECIAL FEATURES Customizing Your Remote Control Y_mr TV comes equipped with a "universal" remote control. In addition to controlling the TV] the universal remote can also operate a VCR, DVD and a cable box (even if your VCR and cable box are made by manufacturers other than Samsung). Note: Tbe minute control migfit not be compatible with all DVD pla,ye_s, VCRs, and Cable boxes.
SPECIAL VCR Codes FEATURES Admiral Aiwa 006, 079 015 Akai 017, 022, 023, 027, 030 Audio Dynarr_:s Bell & Howell Broksonic Candle Cannon Citizen Coloro/me 014, 016 002 010 007, 009, 013, 045, 046, 052 008, 053 007, 009, 013, 045, 046, 052 014 Craig Curds-Mathes Daewoo DBX Dimensia ] 007, 012 000, 007, 008, 014, 015, 046, 053, 064, 067 013, 045, 076 014, 016 000 I)),na_b_ Eleaxohome 015 027 Emerson 0_,[gg, 010,011,015,020,023,027, 034,041,042,047,049,057,062,_5, 067,1_8,070 Fisher 002,012,018,
SPECIAL FEATURES Setting Up Your ] Remote Control to Operate Your Cable Box 1 Turn off yOUrcane box The remote 2 control has four "VCR', "Cable" Press the MODE button and make sure that the CABLE _ED 'modes": "DVD'. IS iiiumlnatec Press the "MODE" remote "TV', control button and to switch to the "Cable" the mode.
SPECIAL Fine FEATURES ] Tuning Channels Use fine tuning to manually adjust a particular channel for optional reception. Select the appropriat e channel Press MENU to display Press the CH • button to select the t Channel", then press the VOL+butto n. Press the 6H Y button to select" Fine tune". <1 Pressthe VOL+or VOLbuttonto adjustthe fine Afl:er you at!just "*" will appear when PLAY while watching the fine tuning, you press DIS_ this channel.
SPECIAL LNA FEATURES (Low ] Noise If" the TV is operating the reception in a weak (a low-noise Amplifier) signal preamplifier area, sometimes boosts the LNA the incoming function can improve signal). Press the MENU button to display the menu, Press the CH V button twice to select the "Picture", then press the VOL+button -41 Pressing VOL - or VOL + will alternate between "On" and "OfL" Press the VOL, or VOL+ button to select LNA ?on.
SPECIAL FEATURES ] 13It Due to the Earth_ TV's location. magnetic When this field occurs, there follow may be same the steps minor image tilt depending on the below. Press the MENU button to disp ay the menu. Press the CN T button twice to select the Picture", then press the ',JOE+ button. Press the Clty button to seIect" RFunction", then press the VOL+ button, II,hI[_iu • Press the CH V button to seiect" Titf' then press buttons to adjust the TitL Press exit, (}l,\p 1[ F(tH SP} IA]
SPECIAL FEATURES Digital Noise If"the broadcast Reduction ] feature signal Reduction received to help reduce by your TV is weak, any static and you ghosting can activate that the Digital may appear Noise on the screen. Press the MENU button to display the menu, then tess the VOL +button to select the" picture" menu Z Pressthe CH V button to select"DigitaI NR" O£f Pressing Press the VOL+ or VOLbutton to select Digital NR"On% Press the MENU button to exit. 4.7 ( .A,,.,¢]_) ,,:s,,,(,.
SPECIAL FEATURES Changing ] the Screen TXM3097WHF/TXM3098WHF Size / TXM3096WHF Press the RSIZE button to change me screen k • Wide: • Panorama: • Zooml: • Zoom2: • 4:3(Normal_: Sets the picture to 16:9 wide mode. Use this mode tor the wide aspect ratio ni a panoramic picture. Magnifies the size of the picture on screen. You can also move the picture on screen using thejoystick up or down. Magnifies the size of the picture more than Zooml. You can also mow th_ picture on screen using the.
SPECIAL FEATURES Changing ] the Press th display the menu, then press the VOL+ button to select the "Picture" menu. 2 Press the CH V button to seIect°ColorTone". 3 Press the VOL+ or VOL buttons to select "Normal"" Warm 1", 'Cool 1"; !'Warm 2" or ° Cool2" according to persenai Preference. Press the MENU button to exit, 4.9 ( ,,.,,,,,,,,_ ];,3,,:s,,,(,., ].
SPECIAL FEATURES Using the ] R.Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. Yuu can set the R.Surf to "5 minutes", then switch channels. After mhlutes, the TV vvri[] return to the original channel To use the R.Surf feature: WhiIe you are watching the channel to which you want to return, p[ess R,SURF_The omscreen display wig lead "Surf on, Press R.
SPECIAL FEATURES Setting the ] On/Off Timer -_l Before using set the TV's clock. Clock" the tinier, you must (See "Setting the on page 3.10). display the menu. When any of the timers are set, the "Timer" LED will illuminate (front Press the CH Y button to select ?Function",then panel press the VOL+ button, Press the CH V button to select "Time", then press the VOL+ button.
i SPECIAL FEATURES i To deactivate select the "On time," "Off" during this step. Press the VO/÷ button to select ?On/Off" Press the OH• or 61-1• button to turn the on4imer On.* (Repeatedly pressing the OH• or OH• button wilt alternate between on When finished, press the rOt + button.
SPECIAL FEATURES Choosing Soundtrack ] a Multi-Channel Sound (MTS) Depending on the particular program being broadcast, you can listen to Stereo, Mono, oia Separate Audio Program. (SAP audio is usually a foreign language translation. Sometimes SAP has unrelated information like news or weather.
SPECIAL FEATURES ] Extra sound settings (Turbo Sound, Surround, Auto Volume, Melody, BBE Woofer) The following sound settings can be adjuster] to suit your personal or preferences. • Turbo Sound (TXM2796HF / TXM3296HF / TXM3096WHF) Turbo sound emphasizes the bass and treble frequencies to add fullness to the sound. • Surround Yuur Samsung TV can create a "surround" effect such that the sound seems to come from all directions.
SPECIAL FEATURES Settings Turbo Volume, Melody ] Sound. Surround, Auto or BBE Press the CHY button to select "S.Function" ; the press the VOL+ button, 3 i._i_ _, TXM2796I tF / TXM3296ItF TXM3096WttF Press the CHV or CHV button to select the required Eem, me D_ess [he VOL + button to selec] _On Press the MENU button to exl[ _llmm _lleleet [133 hl'_ TXM3298I tF / TXM3098WIIF TXM2798I tF / TXM3297ttF TXM3097WHF / TXM2797IIF 4.
SPECIAL FEATURES Viewing Closed ] Captions Yuur TV decodes and displays the closed captions These captions are usually subtitles for the bearing lations. All VCRs record the closed caption signal ed video tapes also provide closed captions. Most vide closed captions as welI. Check for the closed and on the tape_ packaging: [_, that are broadcast with certain TV shows.
SPECIAL FEATURES ] Viewing Picture-in-Picture (TXM3297HF/TXM3097WHF/TXM3298HF/ TXM3098WHF/TXM2798HF) You can use the PIP feature to simultaneously to watch two video sources. Note:The PIP feature does not work with DVD signals and S Video mode. When PIP is selected in the Zoom mode, into the Normal mode.
SPECIAL FEATURES Selecting a Signal ] Source (External A/V) for PIP Quick way to access 1 Just press the SOURCE remote control.
SPECIAL FEATURES Changing the ] Size of the PIP Window -.,el Quick way to access 1 Pressthe MENU button to display the menu Press the SIZE button through Press the CHV to select the _PiP" then oress the VOL+ button, PIP _SLse 3 Press the CHT to se_ec[ the "Size', then press me VOL ÷ button repeatedly to select the" Doable Screen _, _Large Screen", Small Screen" or" Stock ticker". Press the MENU button to exit, 4.
SPECIAL FEATURES Swapping the ] Contents of the PiP image and -_ 1 Main image Quick way to access the SWAP: ,Just press Press the MENU button to l'elllote the SWAP button cont 1"oi. on the oIsplay [Be menu Press the CUV to selec_ the"PiP" [hen press the VOL + button 2 D'ess the VOE + button to select PIP" On." / _PIF I O= Iltrap l_ _=_1, t 1. .
SPECIAL FEATURES Changing the ] PiP Channel _1 Quick way to access 1 Press the MENU button [o display me menu Press the CHV [o se_ec[ the _ PiP" men nress the VOL + button, 2 Press the VOL+ button to select PiP _On." 3 Press the CHV to select [he"Channel inert pres._ the VOL + button. Press [he CHA c* CHV button to cha_ge [ne channel that appears _n [ne PIP window. Press the MENU button to exl[ 4.
SPECIAL FEATURES Using ] the V-Chip (Option) The VChip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of' the _Chip restrictions can be set up oi- changed. Note : When Setting the k/chip feature Your Personal Up is active, channel auto program ID Number features do not function. (PIN) 1 Press the MENU button to display me menL.
SPECIAL How FEATURES ] to Enable/Disable the V-Chip 1 Press the MENU button to o_sp_aythe menu, Press the CH • button to select the _Function men Dress the V0L + button, i!!!__iiiiiiiii_i _ _ _iiiiiii!i _ i¸_ _ iiiiiii_ii 2 Press EneCH • button to select the"V*chiD men Dress [Re VOL + button, The" Enter Pin" screer witl appear Enter your 4*di§ t PIN number 3 To enable the V-Chip [eature, press the VOL+ button so that the "V_Chip lock" field is Yes 3ressing the VOL+ button witl alternate between Ye
I SPECIAL FEATURES ] Press the 6H • button to select the _TV guidelines" ; then press the VOL -.,I Note: These categories consist ot two separate groups: TV-Y and TV-Y7 4 Lyoung children througn a_e 7}.
SPECIAL FEATURES ] 6 How to set the FV.D. L S and V sub-ratings: First, select one of these TV-Ra[tngs:TV-YT.TV-PG,TV-14 or TV_MAtSee Steo 4, on prevtous page_. Next while the TV_Ratingis selected (BLUE), repeatedly press the VOL+ button, This wi_ cycte in/ouch [ne available suD-ra[tngs (FV,L B, D or Vl, A blinking etter f" U" or" B°_will be disptayed for each sub-rating.
SPECIAL FEATURES ] 3 The"V_chip" spreen will appear. Press the CH V button to _' select" MPAA rating", then press the VOL+ button. -,9 Note: 4 The" MPAA rating screen wilt appeaRepeatedly press the CH V The V-Chm callv block cestrictivo." u will automatb any category that is mor_ [?or examt_]e, if vou block rn( "PG- 13" category, then "R." "NC17.
SPECIAL FEATURES ] Viewing the Demonstration [fXM3297HF/TXM3097WHF/TXM3298HF/ TXM3098WHF/TXM2798HF) Tu become fm
TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try No color, wrong colors or tints. Make sure the program is broadcast in color.
APPENDIX Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of service. guidelines to get the maximum performance from your T_/_ Please fo]lo_;v these Placement Do not place the TV near extremely Do not place the TV near appliances such as vacuuE;] hot, cold, humid or dusty places. with electric motors that create magnetic fields, cleaners. Keep the ventilation openings clear; do not place the TV on a soft surface, cloth or paper.
MEMO A.
MEMO ]
MEMO A.
ELECTRONICS
