Specifications

ManualsBrandsSamsung ManualsTVTXJ1396

COLOR TELEVISION RECEIVER

Chassis : K15A

Model: TXJ1366

TXJ1367

TXJ1396

TXJ1966

TXJ1996

COLOR TELEVISION RECEIVER CONTENTS

Precautions

Specifications

Disassembly and Reassembly

Alignment and Adjustments

Troubleshooting

Exploded Views and Parts List

Electric Parts List

Block Diagram

PCB Layout

Wiring Diagrams

Schematic Diagrams

10.

11.

Summary of content (44 pages)

PAGE 1
COLOR TELEVISION RECEIVER Chassis : Model: COLOR TELEVISION RECEIVER K15A TXJ1366 TXJ1367 TXJ1396 TXJ1966 TXJ1996 CONTENTS 1. Precautions 2. Specifications 3. Disassembly and Reassembly 4. Alignment and Adjustments 5. Troubleshooting 6. Exploded Views and Parts List 7. Electric Parts List 8. Block Diagram 9. PCB Layout 10. Wiring Diagrams 11.
PAGE 2
Precautions 1. Precautions Follow these safety, servicing and ESD precautions to prevent damage and protect against potential hazards such as electrical shock and X-rays. 1-1 Safety Precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missing protective shields. 2. When reinstalling the chassis and its assemblies, be sure to restore all protective devices, including: nonmetallic control knobs and compartment covers. 3.
PAGE 3
Precautions 1-1 Safety Precautions (Continued) 9. High voltage is maintained within specified limits by close-tolerance, safety-related components and adjustments. If the high voltage exceeds the specified limits, check each of the special components. 10. Design Alteration Warning: Never alter or add to the mechanical or electrical design of this unit. Example: Do not add auxiliary audio or video connectors. Such alterations might create a safety hazard.
PAGE 4
Precautions 1-2 Servicing Precautions Warning1: First read the “Safety Precautions” section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. Warning2: An electrolytic capacitor installed with the wrong polarity might explode. 1. Servicing precautions are printed on the cabinet. Follow them. 2.
PAGE 5
Precautions 1-3 Precautions for Electrostatically Sensitive Devices (ESDs) 1. Some semiconductor (Òsolid stateÓ) devices are easily damaged by static electricity. Such components are called Electrostatically Sensitive Devices (ESDs); examples include integrated circuits and some field-effect transistors. The following techniques will reduce the occurrence of component damage caused by static electricity. 2.
PAGE 7
Specifications 2.
PAGE 8
Disassembly and Reassembly 3. Disassembly and Reassembly 3-1 Back Cover Removeal Fig. 3-1 1. After removing the screws, pull the cabinet backwards.
PAGE 9
Disassembly and Reassembly 3-2 Main Board Removal Fig. 3-2 Fig. 3-3 1. Separate the socket board from the CRT neck. 2. Remove the Anode Cap from the CRT. 3. Remove the main board by pulling it with both hands. Warning: The FBT is charged with high voltage. Before removing the Anode Cap, discharge the voltage through one of the heat sinks on the main board.
PAGE 10
Disassembly and Reassembly 3-3 Speaker Removal 1. Loosen the screws and remove the speakers. Fig.
PAGE 11
Disassembly and Reassembly 3-4 CRT Removel Fig. 3-5 1. Spread a soft mat on the floor. Place the TV set face down. 2. Remove the 4 nuts mounting the CRT to the front cabinet. 3. Lift the CRT. 4. Caution: Because of the high vacuum and large surface area of the picture tube, be careful while handling it: (1) Always lift the picture tube by grasping it firmly around the faceplate, (2) Never lift the tube by its neck. (3) Do not scratch the picture tube or apply excessive pressure.
PAGE 12
Alignment and Adjustments 4. Alignment and Adjustments 4-1 Service Mode Adjustments 4-1-1 Service Mode Menus Since there are no VRs in the K15A chassis, all adjustments after parts replacement must be done in the Service Mode. Service Mode adjustments are necessary when either the EEPROM (IC902) or the CRT is replaced.
PAGE 13
Alignment and Adjustments 4-1-3 Adjustment in Option Mode 4-1-4 Service Mode Adjustments This adjustment is necessary whenever the EEPROM is replaced. Input data (as marked on the back cabinet). ADJUSTMENT PATTERN OPTION RESET Select “SET OPTION” by pressing the Channel ▼ key twice. ADJUSTMENT PATTERN OPTION RESET Press MENU to go back to the factory mode. ADJUSTMENT PATTERN OPTION RESET Press volume + key. POWER OFF 2. Refer to 4-2 for other adjustments.
PAGE 14
Alignment and Adjustments 4-2 Alignment and Adjustment 4-2-1 General Alignment Instructions 1. Usually, a color TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as picture height, focus and a horizontal and vertical sync. 2. Observe the picture and check for good back and white details. There should be no objectionable color shading: If color shading is present, demagnetize the receiver.
PAGE 15
Alignment and Adjustments 4-2-8 Sub-Contrast Adjustment 4-2-10 Sub-Color Adjustment 1. Input a gray scale pattern. Use a pattern generator (PM5518). 1. Do sub-color adjustment after the SubContrast and Sub-Tint adjustments. 2. Short D208 to switch off the ABL feed-back. 2. D208 should still be shorted. The ABL should still be switched OFF. 3. Check CN201 R-OUT with an oscilloscope. 4. Set RC, BC, GC data to 0 in the Service Mode. 5. Adjust SCT to 2.40 ± 0.1Vp-p 3. Input a color bar pattern.
PAGE 16
Alignment and Adjustments 4-2-11 White Balance Adjustment 4-2-13 Vertical Size Adjustment 1. Input a lion head pattern. 4-2-11 (A) LOW-LIGHT ADJUSTMENTS 1. Input either a lion head or “pure white” color pattern. 2. After the vertical center adjustment, enter into the service mode. 3. Adjust VA so that the each top and bottom of the screen is 4.0. If the top and bottom values are different, adjust VA so that the sum of the two values is 8.0. 2. Operate the receiver for 30 minutes. 3.
PAGE 17
MEMO 4-6 Samsung Electronics
PAGE 18
Troubleshooting 5. Troubleshooting 5-1 No Power No Power OFF Check LED when AC code is plugged. ON Check IC802. Abnormal Abnormal Normal Check Fuse. Check/Replace IC802, R812, D856. Check IC801* Pin 1 Oscillation. Check and Replace D807 ~D810 Abnormal Abnormal (0 ~ 15V) Check/Replace D806, Q401, Q801, D802, D814* Abnormal (0V) Check/Replace PC802, DZ807 Samsung Electronics Check IC801 Pin 3 B+. Normal (15~20V) Check IC801* Pin 4 Voltage Normal (0.
PAGE 19
Troubleshooting 5-2 No Sound No Sound Normal Abnormal Normal Check Waveform of IC201 Pin 52. Check Waveform of IC601 Pin 1. Abnormal Check Connector CN601 and CN701. Normal Abnormal Check CN601 and CN701 Connector Soldering and A/V PCB. Check Waveform of IC601 and IC602 Pins 4. Normal Ok Abnormal Check Waveform of IC201 Pin 1. Normal Check Voltage of IC601 and IC602 Pin 5. Abnormal Volume Up. O.K Check SIF (L201). Normal (approx. 12V) Abnormal Check Power 12V Line Voltage.
PAGE 20
Troubleshooting 5-3 Horizontal Line Appears Single Horizontal Line Normal (24V) Abnormal Check Waveform of IC201 Pins 22,24. Check 24V-C Voltage. Abnormal Check FBT Pin 2 (24V) Oscillation. NG Normal Check Whether O.K a horizontal line appears in Normal the service mode.. Samsung Electronics Check/Replace FBT. Open NG Check/Replace IC201. Check R409 Open. Check/Replace IC301. Check/Replace R409.
PAGE 21
Troubleshooting 5-4 No Signal No Signal Abnormal Check each tuner terminal voltage. Check voltage line. Normal Check tuner SCL,SDA waveform. Abnormal Normal Check Micom IC901. Check IC201 Pins 7,8 waveform. Check whether AGC and AFTadjustment are normal in the service mode. Normal (2Vp-p) Check IC201 Pin 43 waveform level. Abnormal Check IC201 Pins 19,20, 21 waveform level. 5-4 Replace tuner. Abnormal Check IC201 Pin 47 waveform level. Readjust AGC and AFT.
PAGE 22
Exploded Views & Parts List 6.
PAGE 23
Exploded Views & Parts List 6-2 TXJ1966, TXJ1996 No 1 Code No Q’ty Remark TXJ1966,9,VO,S/V,K15A 20F2,BK708P,HIPS,V0,BLK AL,SS,SILVER,R800 -,20F2,NO-SILK,ABS,HB,BLK -,-,SUS304,0.5,OD6,H -,ABS,HB,NTR.
PAGE 24
Electric Parts List 7. Electric Parts List 7-1 Part Differences (by screen size) ....................................................................................... 7-1 7-2 TXJ1366 (TXJ1996 and TXJ1366 Dissimilar Parts) ......................................... 7-9 7-3 TXJ1996 .................................................................................................................................
PAGE 25
No. 1 2 3 4 5 6 7 8 Electric Parts List 7-2 7-1 Part Differences (by screen size) U.S.A LATIN INC H SPECIFICATION CODE No. 14" A34KQV42X,+380mG,14" AA03-10001D 20" A48KRD82X(H),+380mG,21" AA03-10029W Ÿ 14" DSE-1422FL,14" AA27-50001K ¬Ÿ 20" DSE -1992LL1(H),20" AA27-50004W ¬Ÿ 14" 22.5MM AA27-60001E ¬Ÿ 20" -,JH-291-(JH-8210) AA27-60001D ¬Ÿ 14" 7P,22.5PI,12PI,S N 3704-001089 ¬Ÿ 20" 9P,15.24PI,26.
PAGE 26
Samsung Electronics 7-1-1 Inch Option No. 1 2 3 4 5 6 7 8 9 10 12 U.S.A LATIN INC H SPECIFICATION CODE No. 14" C-C 722 1.6KV 2306-000253 ¬Ÿ ¬Ÿ HORIZONTAL CT CAPACITOR 20" C-C 742 1.
PAGE 27
13 14 15 16 17 18 19 20 21 22 Samsung Electronics 23 24 Loc. No. U.S.A LATIN INC H SPECIFICATION CODE No. 14" C-E 0.47uF 50V 2401-001333 ¬Ÿ 20" C-E 0.47uF 50V 2401-001333 ¬Ÿ 14" R-C 56K-J 1/8T 2001-000864 ¬Ÿ 20" R-C 62K-J 1/8T 2004-001990 ¬Ÿ 14" R-M.O 2W 3.3-J 2003-001036 ¬Ÿ 20" R-M.O 1W 1.5-J 2003-000436 ¬Ÿ 14" 8P 300MM AA39-20109D ¬Ÿ 20" 8P 400MM AA39-20109A ¬Ÿ 14" R-C 33K-J 1/8T 2001-000660 ¬Ÿ 20" R-M 7.
PAGE 28
Samsung Electronics No. 25 26 27 28 29 30 31 32 33 34 35 37 U.S.A LATIN INC H SPECIFICATION CODE No. SPECIFICATION 14" C-C 20pF(CH) 2201-000354 ¬Ÿ 20" C-C 20pF(CH) 2201-000354 X 14" R-C 820-J 1/8T 2004-000995 ¬Ÿ 20" R-C 1.2K-J 1/8T 2001-000221 ¬Ÿ 14" R-C 820-J 1/8T 2004-000995 ¬Ÿ 20" R-C 1.2K-J 1/8T 2001-000221 ¬Ÿ 14" R-C 820-J 1/8T 2004-000995 ¬Ÿ 20" R-C 1.
PAGE 29
AC 110V ONLY No. FREE VOLT REMARK Loc. No. SPECIFICATION CODE No. SPECIFICATION CODE No.
PAGE 30
Samsung Electronics 7-1-4 X-Ray Option X-RAY USED No. X-RAY DELETE REMARK Loc. No. SPECIFICATION CODE No. SPECIFICATION CODE No. 1 CX01 C-C 103 25V 2202-000127 X X X-RAY 2 CX02 10uF 50V 2401-000480 X X X-RAY 3 CX03 10uF 50V 2401-000480 X X X-RAY 4 CX04 471 500V 2201-000556 X X X-RAY 5 DX01 MTZ6.
PAGE 31
~73, ~38, ~1F SYSTEM (1 SPK1 / 1 AMP) No. ~1H SYSTEM (2 SPKs / 1 AMP) ~39,~85,~66,~1E,~3E SYSTEM ( 2 SPKs / 2 AMPs) Loc. No. REMARK SPECIFICATION CODE No. SPECIFICATION CODE No. SPECIFICATION CODE No. 1 IC602 X X X X ASSY-H/S LA4425 AA96-50392A WHEN USING 2 AMPs 2 C652 X X X X 2.
PAGE 32
Electric Parts List 7-2 TXJ1366 (TXJ1996 and TXJ1366 Dissimilar Parts) Loc. No. Code No. Description ; Specification Remark Loc. No. Code No.
PAGE 33
Electric Parts List 7-17 TXJ1996 Loc. No. Code No. Description ; Specification Remark Loc. No.
PAGE 34
Electric Parts List Loc. No. ! ! ! ! ! ! ! ! ! ! ! ! D204 D205 D206 D207 D208 D210 D299 D301 D302 D401 D402 D403 D404 D405 D407 D601 D701 D703 D704 D802 D803 D805 D806 D807 D808 D809 D810 D814 D855 D856 D901 D902 D903 D904 D905 D906 DU01 DX01 DX02 DZ601 DZ801 DZ802 DZ803 DZ804 DZ806 DZ807 DZ901 DZ902 DZ903 F801 F801A F801B GT101A IC201 IC301 IC601 IC801 IC802 IC901 IC902 JA601 JA701 JA703 L102 L152 L201 L202 L203 L204 L205* L206 L208 L301 L401 L402 L501 L502 Code No.
PAGE 35
Electric Parts List Loc. No. Code No.
PAGE 36
Electric Parts List Loc. No. ! ! ! ! ! SW904 SW905 SW906 T401 T444 T801 TU01 V999 X201 X202 X901* Z201 Z601 Code No. 3404-000244 3404-000244 3404-000295 AA26-50001B AA26-30001Y AA26-20007L AA40-10006U 3704-001090 2801-000226 2802-000172 2801-003224 2903-001022 2903-000135 Description ; Specification Remark SWITCH-TACT;15V,20MA,90-170GF, SWITCH-TACT;15V,20MA,90-170GF, SW-TACT,V;KPT1122R1KEYSTT=0.3M HORIZ.DRIVE;-,7.1MH,102UH,10-2 TRANS-FRYBACK;-,FSV-20A001,20,125V TRANS-SWITCHING;120V,125/12.
PAGE 37
MEMO 7-14 Samsung Electronics
PAGE 38
Block Diagram 8. Block Diagram IC601 TU01* TUNER TELH9-212A SOUND-AMP 2.5W x 1CH LA4425 SAW M1859M DUAL IC201 IC902 1CHIP IF/V/C/D KA2163B EEPROM KS24C020 R.G.B CRT I2C BUS Q401* IC901* H-TR KSC5368 MICOM SZM-354ET EXT IN EXT IN VIDEO AUDIO T444* VERTICAL-AMP KA2131 D807 ~ D810 IC801* SPS CONTROL KA3SO680 KA3S0765 Samsung Electronics F.B.T 14" : FSV14A001 20" : FSV20A001 21" : FSV20A001 T801* SWITCHING TRANS (125V) S:125V,12.5V (12.
PAGE 39
PCB Layout 9. PCB Layout 9-1 PCB-MAIN Loc. No.
PAGE 40
Wiring Diagram 10.
PAGE 41
Schematic Diagrams 11.
PAGE 42
Schematic Diagrams 11-2 MAIN 2/4 TP13 IC201 30PIN TP14 IC201 32PIN TP15 IC201 37PIN TP16 IC201 41PIN TP17 IC201 43PIN TP18 IC201 45PIN TP18 TP16 TP21 TP14 TP20 TP13 TP19 TP15 TP17 TP19 IC201 47PIN TP2 TP12 TP5 TP6 TP10 TP4 TP1 IC201 2 PIN TP2 IC201 4 PIN TP3 IC201 7PIN TP21 IC201 53PIN TP10 IC201 25PIN TP11 IC201 27PIN TP8 IC201 23PIN TP9 IC201 24PIN TP9 TP8 TP3 TP12 IC201 28PIN TP11 TP1 TP7 TP20 IC201 49PIN TP4 IC201 19PIN TP5 IC201 20PIN TP6 IC201 21PIN TP7 IC201 22PIN
PAGE 43
Schematic Diagrams 11-3 MAIN 3/4 TP24 TP24 TP25 IC801 1 PIN TP26 TP25 TP27 TP27 T444 10 PIN TP26 : Power Line Si l Li Samsung Electronics 11-3
PAGE 44
Schematic Diagrams 11-4 MAIN 4/4 : Power Line : Signal Line 11-4 Samsung Electronics