User guide

Composer Pro User Guide
Copyright © 2011 Control4. All Rights Reserved.
Saved: 4/14/2011 4:10:00 PM
200-00005 Composer Pro
User Guide Part 2
Page 71 of 179
2. Ensure that the Auto Scan Enabled box is checked.
When you select the Auto Scan Enabled option from the device's Properties page in Composer
Pro, an automatic scan of the disc(s) is available if you add a new disc to an empty slot, or if a
disc is removed. In those cases, the Disc Changer automatically recognizes the change, and the
Navigators automatically update the changes. The Disc Changer recognizes the changes in its
slot when its door closes to perform the auto-scan. The Auto-scan feature does not detect when a
disc is replaced or swapped.
Note: Control4 recommends that you check the Ignore Unexpected Play, Stop, or Pause
option. This option should be checked if you are configuring a system with lighting, for example,
when the movie starts playing, and the lights in the room dim. Normally, you can use the Play,
Stop and Pause functions on the Disc Changer during the course of a movie being played. By
checking the option, these functions are ignored by the system.
3. Open the Disc Changer drive's bay, and change the existing DVD or CD.
4. Close the bay.
5. The auto-scan begins automatically when the Disc Changer door closes, and the information for
the new DVD or CD is available in the Navigators.
5.4.5.3 Searching Media in a Disc Changer
To search media loaded in the Disc Changer to add it to the Media Database:
1. Click Media.
2. Select the Controller in the project tree.
3. In the Disc Changer pane, click Search.
4. Type the DVD name in the blank box. The possible DVD titles from the Web database appear in
the Search Results window. Use the scrollbar to find the appropriate DVD title
Example: “A Beautiful Mind”
Select the appropriate DVD title, drag it over the empty line item, and then select it again.