User guide

Composer Pro User Guide
Copyright © 2011 Control4. All Rights Reserved.
Saved: 4/14/2011 4:10:00 PM
200-00005 Composer Pro
User Guide Part 2
Page 6 of 179
Tip: If the device’s network address is not on this list, click Refresh. If it still does not appear,
click Add to enter it manually. If you do not know the network address, find it at the Tools menu >
Network Tools.
3. In the Devices pane (double-click the device in "Devices" to open the device pane), click the
Network tab, and click Configure.
4. Click Next when a Network Configuration Wizard dialog appears.
5. In the dialog, enter the new name of the device, and click Next.
Note: An error occurs if there are any spaces in the new name text. Do not include spaces in the
new name.
If the device has already been identified on the Control4 system, and you want to change the
name, identify the device again because the Controller no longer recognizes the name, and it
cannot communicate with the device.
6. Select the network you want the device to be a part of, such as an Ethernet or Wireless, and click
Next.
7. Select the method for obtaining an IP address, such as DHCP (first option) or Status IP (second
option), and click Next.
Example: "Obtain an IP address automatically using DHCP"
8. Select the method to obtain the DNS server address, such as DHCP (first option) and Static IP
(second option), and click Next. Control4 recommends that you obtain the DNS server address
automatically.
Example: "Obtain DNS server address automatically"