User guide

Composer Pro User Guide

Saved: 4/14/2011 4:10:00 PM

200-00005 Composer Pro

User Guide Part 2

Page 5 of 179

5. Advanced Topics

If you are a new user, this section assumes that you are familiar with Composer Pro Getting Started

and “The Basics.” The Advanced sections are designed for more advanced Composer Pro users.

Use the subsections in this Advanced section to

• Learn how to set up a network configuration

• Learn how to create device drivers

• Learn how to connect and verify devices you've installed and set up

• Learn how to set up media

• Learn how to use Agents

• Learn how to program the Control4 system in Composer Pro

5.1 Setting Up a Network Configuration

Use the Control4

Composer Pro Tools menu to set up a WiFi network configuration using static IP

addresses.

For more information about setting up the network for a Control4 system, refer to the "Basic

Networking" training sessions conducted by the Control4 Training team. Training information is

available in the Dealer portal.

Note: This example procedure only applies to Speaker Point, Touch Screens, Amplifiers, Tuners and

Audio Switch devices.

To set up the network configuration for Speaker Point or Touch Screens:

1. Start Composer and connect to a Director.

1. From the Tools menu, select System Manager.

2. In the Devices pane, select the network address of the Director for the device for which you want

to set up the network configuration, and click Connect.