User guide

Composer Pro User Guide
Copyright © 2011 Control4. All Rights Reserved.
Saved: 4/14/2011 4:10:00 PM
200-00005 Composer Pro
User Guide Part 2
Page 41 of 179
b. Select an unidentified device in the address list, then right-click and choose Identify (or click
the Identify button in the list header). A device-specific instruction screen with a graphic of
the device displays (such as the Home Controller HC-1000).
c. At the physical device, press the Identification button or dial, as indicated on the screen. The
button to be pushed on the device flashes on the screen.
d. When the device’s network address displays in the box, click Next to continue, or click Close
if you’ve identified the IP network device. Follow these steps for each device.
When you are finished, notice that the Address column is populated with an address for every
network device.
Define the Control and AV Connections
4. For each device, define the following when applicable:
• Video connections (path of video signals)
• Audio connections (path of audio signals)
• Control connections (how the Controller communicates with the device)
a. In Connections, click the Control/AV tab.