User guide

Composer Pro User Guide

Saved: 4/14/2011 4:10:00 PM

200-00005 Composer Pro

User Guide Part 2

Page 162 of 179

To add a Video Wall:

1. Add and configure all applicable devices to the system required for the Video Wall.

In Composer Pro, when you add the second or third monitor to the project, add them to a

separate Room object. This physical device still exists in the same room, but the Television

object must reside in a separate Room object in the project.

Example: Assuming that the first television is in the Theater room, add two (2) rooms: Theater-

right and Theater-left. Place a Television-right and the Television-left in each room.

2. Click Connections.

3. In Connections, ensure that all the Network, Control/AV, and Room connections are configured.

Example: Make the following connections for the example system:

• Network—At the Network tab, identify the Controller to the network.

• Control—At the Control/AV tab make a control connection to the Controller for every piece of

AV equipment. These connections in the Composer Pro software should mirror the actual

connections.

• AV—At the Control/AV tab define the connections between the AV equipment by making the

appropriate connections between device objects. These connections in the Composer Pro

software should mirror the actual connections.

4. In the Agents pane, click Add.

5. On the dialog that appears, select Video Wall and click OK.

6. In the Agents pane, select the Video Wall.

7. In the Ultimate Sports Agents pane and in the Channel pane, select the channels you want

available. Click Add to add them to the “Display these channels List.” This is similar to adding

them to a “Favorite’s” list. The list you create is used for each monitor.