User guide
Composer Pro User Guide
Copyright © 2011 Control4. All Rights Reserved.
Saved: 4/14/2011 4:10:00 PM
200-00005 Composer Pro
User Guide Part 2
Page 143 of 179
17. Drag the green arrow to the Script pane.
18. In the File menu, click Refresh.
19. Test the Email Notification agent by going to the door and opening it. An email is sent to your
Inbox with the Security Alert as a subject.
5.5.6.7 Example: Program Using the Intercom Agent
Use the Control4® Composer Pro Agents and Programming views to program this agent.
The Intercom agent lets you configure the 5" or 7" In-W
all Touch Screens so that the
Con
trol4 system acknowledges the Intercom system and can communicate with it. Note: Only these
Touch Screens models are capable of Intercom functionality.
You can send broadcasts, monitor a room, and other controls with this agent. Example: If you have
an elderly parent living in their own home, you can create a macro and assign it to a keypad button. If
your family member is in stress, they simply press the keypad button to notify you that something is
wrong. Another example is a “Good Night” setting where all Touch Screens in the house can be set to
“Privacy Enabled” when it’s time to go to sleep. Or you can monitor your kids’ room after they’ve gone
to bed to ensure that they’re going to sleep when they should.
Example: This example demonstrates how to send a ‘test’ announcement to a Touch Screen in the
Master Bedroom that says “You are being monitored.” The Master Bedroom is then monitored.
Prerequisites
The following devices are added and identified (with a network address) in the project:
• Controller
• 5"
or 7" In-Wall Touch Screen
• In
tercom license
• Intercom agent (see below)
Note: An Intercom license must be assigned and active on the consumer's account. See Managing
Dealer Accounts on My.Control4.Com for details.
To set up an Intercom agent:
1. Start Composer and connect to a Director.
2. Click Agents.
3. (Initial Intercom agent only) Click Add.
4. Select Intercom, and then click OK to add Intercom to the agent types list in the project. The next
time you want to configure the Intercom function, just select the Intercom item in the Agents pane.