Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 74 of 132

3.2.1.13.1 Procedure

To clear out a project:

From the File menu, select Clear Project to erase the project configuration information.

3.2.1.14 Exiting Composer

Use the Exit command to close Control4

Composer Pro.

3.2.1.14.1 Procedure

To exit Composer:

1. From the File menu, select Exit.

2. Composer asks you if you want to back up your configuration information.

Note: Control4 recommends that you always save a backup copy of your configuration.

3.2.1.15 Getting Project Configuration Information from a Controller

Use the Control4

Composer Pro 'Connect to Director' link to view configuration information.

3.2.1.15.1 Procedure

To get existing project configuration data from a Controller:

1. Verify that your PC and the Controller are connected to the same network.

2. From the Composer Startup screen, click Director on Local Network or from menu bar, click

File > Connect to Director (see below). The project configuration appears unless it is a new

project.